Sony LSPX-W1, Руководство по эксплуатации

Страница: 54 / 91

54
About Indicators
About Indicators
The WARNING1 or WARNING2 indicator lights up or flashes if there is any trouble with your
projector.
Flashing/Lighting indicators The number of
flashes Cause and Remedy
Three times The temperature of the light source is
unusually high. Turn off the power and
wait for the light source to cool, then turn
on the power again.
If the symptom persists, the light source
may be at the end of its service life. In this
case, consult with qualified Sony
personnel.
Five times The top cover does not open properly.
Turn the unit off, then turn the unit on. If
the top cover still does not open properly,
consult with qualified Sony personnel.
Six times The unit detects a drop impact.
If there is abnormality on the unit, consult
with qualified Sony personnel.
If there are no abnormalities on the unit,
disconnect the AC power cord and check
that the LED indicator turns off, then
connect the AC power cord and turn the
unit on.
Seven times Turn the unit off, check if the speaker cords
are connected properly, then turn the unit
on.
If the indicators flashes seven times
frequently, consult with qualified Sony
personnel.
Twice The internal temperature is unusually high.
Check to ensure that if nothing is blocking
the ventilation holes or whether or not the
unit is being used at high altitudes.
Three times The fan is broken. Consult with qualified
Sony personnel.
WARNING1
indicator
WARNING2
indicator
(Flashes in red)
(Flashes in red)
(Flashes in red)
Both indicators flash