Sony LSPX-W1, Руководство по эксплуатации

Страница: 44 / 91

44
Function Menu
3D Brightness For adjusting the brightness of the picture when watching 3D video
images.
You can select the brightness from “High” or “Standard.”
3D Depth Adjust For adjusting the depth of the 3D video images on the projection surface.
The setting can be made only when a 3D Format other than “Simulated
3D” is selected.
We recommend that “3D Depth Adjust” be set to “0.” The 3D video
images may be difficult to perceive, depending on the setting of “3D
Depth Adjust.”
Simulated 3D
Effect For adjusting the 3D effect when 2D content is converted to 3D video
images. You can select the effect from among “High,” “Middle,” and
“Low.”
Tip
There are differences in perception of 3D video images converted by the
simulated 3D function among individuals.
Dynamic Range Sets the video input level for HDMI 1, 2, 3, and 4 connectors.
Auto: Sets the video input level automatically.
Limited: The video input level is set for signals of 16-235.
Full: The video input level is set for signals of 0-255.
If the video output setting of the connected HDMI device is not set
correctly, light and dark parts of the video may appear too light or too
dark.
Volume
[VOLUME] Higher values increase the volume, while lower values decrease the
volume.You can make adjustments by pressing the /– button
on the remote control.
Tips
• You need to connect the speakers to the unit.
• The “Speaker” setting needs to be set to “On.”
Speaker When you select “On,” the sound is output from the supplied speakers.
When you do not want to output the sound from the speakers, select
“Off.”
Tip
You need to connect the speakers to the unit.
Setting items Description
Depth
Normal Front Depth
Note