Sony LMD1541W, Руководство по эксплуатации, Страница: 29 / 44

Adjustment Using the Menus
29
WFM/ALM/VECTOR (waveform monitor,
audio level meter, and vectorscope)
SETTING
TALLY 2 Selects the color of tally 2 lamp
displayed in IMD. Selecting “0
(commanded color)” sets the same
color as set in TSL command.
Selecting from 1 and 8 sets the
following colors, regardless of the
command setting.
•
0 : Commanded color
• 1 : White
• 2 : Red
• 3 : Green
• 4 : Blue
• 5 : Yellow
• 6 : Cyan
• 7 : Magenta
• 8 : Amber
Submenu Setting
DISPLAY Select ON to display the WFM
(waveform monitor), ALM (audio level
meter), or VECTOR (Vectorscope) or
OFF not to display.
Submenu Setting
D I S P L AY:
xxx
W F M / A L M / V E C T O R :
xxxxxx
P O S I T I O N :
x
T R A N S PA R E N C Y:
xxxxx
C O L O R :
xx
I N T E N S I T Y:
x
Z O O M :
xxx
L I N E S E L E C T :
xxx
L I N E P O S I T I O N :
xxx
USER CONFIG – WFM/ALM/VECTOR SETTING 1/2
TA R G E T : xxx
USER CONFIG – WFM/ALM/VECTOR SETTING 2/2
WFM/ALM/
VECTOR Sets the display settings for WFM/ALM/
vectorcope.
•
WFM : Displays the wave form
monitor.
• ALM : Displays the audio level meter.
• VECTOR : Displays the vectorscope.
When WFM is selected, the waveform
and audio level are displayed. When
ALM is selected, the audio level is
displayed in eight channels.
When VECTOR is selected, the color
component of the image signal and the
audio levels are displayed.
When SDI signal is input, the audio
levels for channels selected in SDI
AUDIO SETTING are displayed.
Each display type is illustrated below.
(The waveform percentage and audio
level units/values do not appear on the
display.)
When WFM is selected
When ALM is selected
Submenu Setting
-4%
0%
50%
100%
0
OVER
(dB)
-10
-20
-30
-60
1 2
109%
Audio level Waveform
Channel number
(The channel number which is selected in
SDI AUDIO SETTING is displayed.)
0
(dB)
-10
-20
-30
-60
OVER
1 2 3 4 5 6 7 8
Audio level
Channel number
(Displayed in eight channels, including the channel
which is selected in SDI AUDIO SETTING.)