Sony LMD-941W, Руководство по эксплуатации

Страница: 65 / 76

Adjustment Using the Menus
65
WFM/ALM/VECTOR (waveform monitor,
audio level meter, and vectorscope)
SETTING
TEXT COLOR Selects the color of text displayed
in IMD. Selecting “0 (commanded
color)” sets the same color as set in
TSL command. Selecting from 1
and 8 sets the following colors,
regardless of the command setting.
•
0 : Commanded color
• 1 : White
• 2 : Red
• 3 : Green
• 4 : Blue
• 5 : Yellow
• 6 : Cyan
• 7 : Magenta
• 8 : Amber
TEXT BRIGHTNESS Selects brightness of text displayed
in IMD. Selecting “0 (commanded
brightness)” sets the brightness
same as set in TSL command.
Selecting from between 1 and 3 sets
the following brightness, regardless
of the command setting.
•
0 : Commanded brightness
• 1 : 100%
• 2 : 50%
• 3 : 14%
TALLY 1 Selects the color of tally 1 lamp
displayed in IMD. Selecting “0
(commanded color)” sets the same
color as set in TSL command.
Selecting from 1 and 8 sets the
following colors, regardless of the
command setting.
•
0 : Commanded color
• 1 : White
• 2 : Red
• 3 : Green
• 4 : Blue
• 5 : Yellow
• 6 : Cyan
• 7 : Magenta
• 8 : Amber
TALLY 2 Selects the color of tally 2 lamp
displayed in IMD. Selecting “0
(commanded color)” sets the same
color as set in TSL command.
Selecting from 1 and 8 sets the
following colors, regardless of the
command setting.
•
0 : Commanded color
• 1 : White
• 2 : Red
• 3 : Green
• 4 : Blue
• 5 : Yellow
• 6 : Cyan
• 7 : Magenta
• 8 : Amber
Submenu Setting
Submenu Setting
DISPLAY Select ON to display the WFM
(waveform monitor), ALM (audio level
meter), or VECTOR (Vectorscope) or
OFF not to display.
WFM/ALM/
VECTOR Sets the display settings for WFM/ALM/
vectorcope.
•
WFM : Displays the wave form
monitor.
• ALM : Displays the audio level meter.
• VECTOR : Displays the vectorscope.
When WFM is selected, the waveform
and audio level are displayed. When
ALM is selected, the audio level is
displayed in eight channels.
When VECTOR is selected, the color
component of the image signal and the
audio levels are displayed.
When SDI signal is input, the audio
levels for channels selected in SDI
AUDIO SETTING are displayed.
Each display type is illustrated below.
(The waveform percentage and audio
level units/values do not appear on the
display.)
D I S P L AY: xxx
W F M / A L M / V E C T O R : xxxxxx
P O S I T I O N : x
T R A N S PA R E N C Y: xxxxx
C O L O R : xx
I N T E N S I T Y: x
Z O O M : xxx
L I N E S E L E C T : xxx
L I N E P O S I T I O N : xxx
USER CONFIG – WFM/ALM/VECTOR SETTING 1/2
TA R G E T : xxx
USER CONFIG – WFM/ALM/VECTOR SETTING 2/2