Features
7
Features
The LMD-2110W (21.5-type) is a multiple format LCD
monitor for broadcast/professional use featuring a
precise image and high performance. Supporting digital/
analog main broadcast signals, and HDMI
1)
input, it can
be used under various lighting conditions.
1)
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
High brightness LCD panel
Because of precise image and high speed response, real
color image can be reproduced.
Multi-format
The monitor supports the video, Y/C, RGB, component
and HDMI input signals.
Both NTSC and PAL color systems are supported, and
the appropriate color system is selected automatically.
SDI signals can be available when input adaptor BKM-
320D (optional) is used.
HD/SD-SDI signals can be available when input adaptor
BKM-341HS (optional) is used.
For more information, see “Video signal formats”
(page 24).
External sync input
When the EXT SYNC button is in the on position, the
unit can be operated on the sync signal supplied from an
external sync generator.
Automatic termination (connector with
mark only)
The input connector is terminated internally at 75 ohms
when nothing has been connected to the output
connector. If a cable is connected to the output
connector, the internal terminal is automatically
released and the signals input to the input connector are
output to the output connector (loop-through).
External remote control function
You can directly select the input signal, aspect, etc., by
operating the equipment connected to the PARALLEL
REMOTE connector.
Monitor stand with tilt function
A monitor stand with tilt function is equipped for desk
top use. It shall be removed when mounted on the rack.
Rack mount
The monitor supports the VESA (100
×
100 mm)
standard.
It can be mounted on an EIA standard 19-inch rack
(using an optional mounting bracket).
For more information, see “Installing to the Rack”
(page 11).
Consult with Sony qualified personnel for wall mount
installation.
3-color tally lamp
The tally lamp lights in red, green or amber to monitor
each input picture and check the on-air mode.
Blue only mode
In the blue only mode, a monochrome display is
obtained with all three of the R/G/B picture elements
driven with a blue signal. This mode is convenient for
chroma and phase adjustments and monitoring of signal
noise.
Marker function
SAFETY AREA marker, CENTER MARKER, 16:9
MARKER for the 4:3 aspect ratio or 4:3 MARKER for
the 16:9 aspect ratio can be displayed.
Scan setting
You can set the display size to normal scan, over scan or
full screen mode.
Select color temperature and gamma mode
You can select the color temperature from among two
(HIGH and LOW) settings.
You can select the gamma mode from among five
settings.
Aspect setting
You can set the monitor to 4:3 or 16:9 display mode
according to the input video signal.
On-screen menus
You can set the appropriate settings according to the
connected system by using the on-screen menus.
Select language display
You can select from seven display languages, English,
French, German, Spanish, Italian, Japanese and
Chinese.
Key inhibit function
You can inhibit a key function to prevent missing an
operation.
I/P mode setting
This unit is equipped with an I/P mode setting function
that is used to minimize picture delay due to the signal
conversion process.
Содержание LMD-2110W
Страница 26: ...Sony Corporation ...
