10
Specifications
LMD-4251TD
LMD-2451TD
Picture Performance
Panel
a-Si TFT Active Matrix LCD
Picture size (diagonal)
1067.0 mm (42 1/8 inches)
613.2 mm (24 1/4 inches)
Effective picture size (H x V)
930.0 x 523.0 mm (36 3/4 x 20 3/4 inches)
518.4 x 324.0 mm (20 1/2 x 12 7/8 inches)
Resolution (H x V)
1920 x 1080 pixels (Full HD)
1920 x 1200 pixels (WUXGA)
Aspect
16:9
16:10
Colors
Approx. 16.7 million colors
Viewing angle (2D mode)
89°/89°/89°/89° (typical) (up/down/left/right contrast > 10:1)
Vertical viewing angle (3D mode)
46° at a viewing distance more than 620 mm, crosstalk less than 7% (typical)
54° at a viewing distance more than 320 mm, crosstalk less than 7% (typical)
Input
Composite
BNC (x1), 1.0 Vp-p ±3 dB sync negative
Y/C
Mini DIN 4-pin (x1)
Y: 1.0 Vp-p ±3 dB sync negative
C: 0.286 Vp-p ±3 dB (NTSC burst signal level), 0.3 Vp-p ±3 dB (PAL burst signal level)
RGB, Component
BNC (x3)
RGB: 0.7 Vp-p ±3 dB (Sync On Green, 0.3 Vp-p sync negative)
Component: 0.7 Vp-p ±3 dB (75% chrominance standard color bar signal)
DVI-D
DVI-D (x1), TMDS single link
HD15
D-sub 15-pin (x1)
R/G/B: 0.7 Vp-p sync positive (Sync On Green, 0.3 Vp-p sync negative)
Sync: Total level (polarity free, H/V separate sync)
Plug & Play function: corresponds to DDC2B
Audio
Phono jack (x2) (L, R), -5 dBu 47 kilohms or higher
External sync
BNC (x1)
0.3 Vp-p to 4.0 Vp-p ± bipolarity ternary or negative polarity binary
Option slot
2 slots, Signal format: H: 15 kHz to 45 kHz, V: 48 Hz to 60 Hz
Parallel remote
Modular connector 8-pin (x1) (Pin-assignable)
Serial remote
D-sub 9-pin (RS-232C) (x1), RJ-45 modular connector (Ethernet) (x1) (10BASE-T/100BASE-TX)
DC in
–
XLR-type 4-pin (male) (x1)
DC 24 V (output impedance 0.05 ohms or less)
Output
Composite
BNC (x1), loop-through, with 75 ohms automatic termination
Y/C
Mini DIN 4-pin (x1), loop-through, with 75 ohms automatic termination
RGB, Component
BNC (x3), loop-through, with 75 ohms automatic termination
External sync
BNC (x1), loop-through, with 75 ohms automatic termination
Audio monitor out
Phono jack (x2) (L, R)
Speaker (built-in)
1.0 W + 1.0 W (stereo)
General
Power requirements
AC 100 V to 240 V, 50/60 Hz, 2.7 A to 1.1 A
AC 100 V to 240 V, 50/60 Hz, 1.5 A to 0.7 A, DC 24 V, 5.7 A
Power consumption
Approx. 250 W (max.) (with 2 x BKM-229X)
Approx. 130 W (max.) (with 2 x BKM-229X)
Operating temperature
0°C to 35°C (32°F to 95°F), Recommended: 20°C to 30°C (68°F to 86°F)
Operating humidity
30% to 85% (no condensation)
Storage and transport temperature
-20°C to +60°C (-4°F to +140°F)
Storage and transport humidity
0% to 90%
Operating, storage, and transport pressure
700 hPa to 1060 hPa
Dimensions (W x H x D) (with stand)
–
602.4 x 497.9 x 269.9 mm (23 3/4 x 19 5/8 x 10 3/4 inches)
Dimensions (W x H x D) (without stand)
1027.0 x 616.0 x 130.0 mm (40 1/2 x 24 3/8 x 5 1/8 inches)
602.4 x 386.2 x 110.0 mm (23 3/4 x 15 1/4 x 4 3/8 inches)
Mass (with options)
23.5 kg (51 lb 13 oz) (with 2 x BKM-229X)
11.5 kg (25 lb 6 oz) (with 2 x BKM-229X)
Mass
23.0 kg (50 lb 11 oz)
11.0 kg (24 lb 4 oz)
Supplied accessories
AC power cord (1), AC plug holder (1), 3D glasses (including case) (2), L/R labels (1), Operating Instructions (1), CD-ROM (1), Using the CD-ROM Manual (1)
