24
LMD-30/10 Series
Operational Convenience
Marker settings
LMD-30/10 Series monitors can display a center marker,
aspect markers, and safety area markers in different sizes.*
The brightness of these markers can be set at different levels.
These flexible marker settings make these monitors extremely
convenient display devices for a variety of shooting scenarios.
* 80%, 85%, 88%, 90%, or 93% can be selected.
Selectable scan size for video input and aspect ratio
With LMD-30/10 Series monitors, the scan size can be
selected: Normal (0%), Over (5%), and Full scan.
The aspect ratio can be switched between 16:9 and 4:3
according to the input signal.
Three-color tally
LMD-30/10 Series monitors are equipped with a tally lamp
that can be lit via a parallel remote connector. The status of
the signal displayed on the monitor can be identified by the
tally color: red, green, or amber.
Monaural audio monitoring
LMD-30/10 Series monitors are equipped with a speaker
(0.5 W), which enables the user to monitor audio.
Protected controls
With LMD-30/10 Series monitors, the key-inhibit function helps
prevent inadvertent operation from the control panel.
High Picture Performance
High purity color filters
Equipped with high-purity RGB color filters, LMD-30/10 Series
monitors achieve color reproduction with stunning depth and
saturation.
Excellent brightness and contrast
LMD-30/10 Series monitors provide high-brightness, high
contrast images thanks to their wide aperture LCD panels.
In addition, the use of precisely manufactured RGB color
filters allows these monitors to reproduce colors with stunning
depth and saturation – creating highly natural images.
109% peak white and 10-bit signal processing
Incorporating high-purity RGB color filters and 10-bit signal
processing engine, LMD-30/10 Series monitors offer stunning
109% peak white reproduction without clipping and a smooth
gray scale along CRT-like gamma.
Color temperature/gamma selection
With the LMD-30/10 Series monitors, users can select from
high, low, or preset color temperatures. A variety of gamma
modes can also be selected.
I/P mode selection
LMD-30/10 Series monitors provide two I/P modes so that
users can select the most suitable mode for each purpose:
INTER-FIELD:
This mode interpolates images between fields. This is used
for picture quality precedence (e.g., to reduce the jagged
effect on moving pictures).
LINE DOUBLER:
This mode interpolates by repeating each line. This is
used for editing and monitoring fast-moving images, and
checking line flicker. The minimum processing time is less
than one field (0.5 frames).
Picture Delay Minimum
Audio is just as much a part of the show as video, and timing
is always an issue. Picture Delay Minimum mode is selectable
to minimize I/P conversion times for audio synchronization
during editing. By selecting “LINE DOUBLER” in IP mode, the
signal processing (I/P conversion) period is less than one field
(0.5 frames).
Incorrect gamma image*
Correct gamma image*
* Simulated images
