38
GB
Problems and remedies
If you run into any problem using this unit, use
the following check list.
First, check that the power cord is connected
firmly and the speakers are connected correctly
and firmly.
Should any problem persist, consult your
nearest Sony dealer.
General
“--:--” appears in the display.
• A power interruption occurred. Set the clock and
timer settings again.
The display starts flashing as soon as you plug
in the power cord even though you haven’t
turned on the power.
• Refer to demonstration (see page 32).
The clock setting is canceled.
• The power cord is disconnected or a power
failure occurs. Redo “Setting the clock” (on page
10). If you have set the timer, redo “Waking up
to music” (on page 28) and “Timer-recording
radio programs” (on page 24).
The radio presetting/timer setting is canceled.
• The power cord is disconnected or a power
failure occurs for longer than half a day. Redo
“Presetting radio stations” (on page 20).
Troubleshooting
Recording audio from a
connected component
Making an analogue
recording from an analogue
component on a tape
1
Connect the audio cords.
See “Hooking up optional components” on
page 35.
2
Start recording manually.
See “Recording to a tape” on page 23.
Recording on a connected
component
1
Connect the audio cords.
See “Hooking up optional components” on
page 35.
2
Start recording.
Refer to the operating instructions provided
with connected component.
