Sony LBT-XGR600 - Compact Hi-fi Stereo System, Руководство по эксплуатации

Страница: 14 / 36

14
GB
Notes
• Do not press A EJECT Z or Z B EJECT while
playing a tape, otherwise the tape could be damaged.
• The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the system is placed near a television.
Tip
The deck stops automatically after repeating the
sequence five times.
You can record a whole CD on a tape.
You can use TYPE I (normal) tape. The
recording level is adjusted automatically.
1
Load a recordable tape into deck B.
2
Load a disc you want to record.
3
Press CD SYNC.
Deck B stands by for recording.
When you want to record on the reverse
side, press
h
.
4
Press DIRECTION repeatedly to select
g to record on one side. Select j
(or RELAY) to record on both sides.
5
Press X .
Recording starts.
To stop recording
Press x .
To record a disc by specifying
track order
You can record only your favorite CD tracks
using Program Play. Between steps 2 and 3,
perform steps 1 to 6 of “Creating your own
program” (page 10).
Also, you can check the required tape length for
recording a disc. Press EDIT after you have
loaded a disc in CD function. The required tape
length for the currently selected disc appears,
followed by the total playing time for side A and
side B respectively (Tape Select Edit).
Notes
• You cannot use Tape Select Edit when Program Play
mode has been set. After clearing the entire program,
follow the above procedure.
• You cannot use Tape Select Edit for discs containing
over 20 tracks.
Tape – Recording
Recording your favorite
CD tracks on a tape
— CD-TAPE Synchro Recording