Sony LBT-XGR600 - Compact Hi-fi Stereo System, Руководство по эксплуатации

Страница: 10 / 36

10
GB
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programmed tracks
onto a cassette tape (page 14).
Using the display window
1
Press FUNCTION repeatedly until “CD”
appears, then load a disc.
2
Press PLAY MODE in stop mode
repeatedly until “PROGRAM” appears.
3
Press one of DISC 1 – 5 or DISC SKIP to
select a disc.
4
Press . or > repeatedly until the
desired track number appears.
5
Press PLAY MODE once.
The track is programmed.
First the programmed playing order and
“STEP” appear, then the total playing time
appears.
6
Program additional discs or tracks.
7
Press NX (or CD N on the remote).
Program Play starts.
Other operations
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press
NX
(or CD
N
on the remote).
• “– –.– –” appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.
Creating your own
program
— Program Play
To program Repeat steps
Other tracks on the
same disc 4 and 5
Other tracks on
other discs 3 to 5
To Do this
Cancel Program
Play Press PLAY MODE repeatedly
until “PROGRAM”, “ALL
DISCS SHUFFLE” or “1 DISC
SHUFFLE” disappears.
Clear a track from
the end Press CLEAR on the remote in
stop mode.
Add a track to the
end of the program
in stop mode Perform step 3 to 5.