Sony LBT-N355KR, Руководство по эксплуатации

Страница: 18 / 32

Chapter 4: the Tape Player
EN
18
continued
➔
5
Select dual or single-sided recording.
* Recording always stops at the end of the
reverse side. Be sure to start from
recording pause.
6
Press CD SYNCHRO.
The REC and
∏
(pause) lamps light up
and deck B stands by for recording.
The
·
lamp lights up and the
ª
lamp
flashes for a few seconds, then
disappears.
If you want to start recording from the
reverse side, press
ª
so that the
ª
indicator lights steadily.
7
Press
∏
on the tape player to release
recording pause.
Recording starts.
After 10 seconds, the CD player starts
playing.
To stop recording
Press
π
on the tape player.
To check the order
Press CHECK repeatedly.
Each time you press CHECK, the number of
the programmed tracks appear in the
display.
To cancel programme edit
Press CONTINUE.
Recording From the
Radio
You can record from the tuner onto a tape.
Use TYPE I (normal) or TYPE II (CrO
2
)
tape.
Press DIRECTION
to select
A
ß
or RELAY
To record
One side of the tape
Both sides*
Side in recording
pause mode
2 3
6
4
1
π
1
Press
§
EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording starts from the front side oh
the tape, unless you change the playing
direction before recording.
Make sure the tabs on the cassette have
not been removed.
2
Press TUNER/BAND several times
until the desired radio band appears.
3
Tune in the radio station you want to
record. (See “Listening to the Radio”, or
“Playing Preset Radio Stations” for
details.)
4
Select dual or single-sided recording.
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
5
Press REC.
The REC and
∏
(pause) lamps light up
and deck B stands by for recording.
The
·
lamp lights and the
ª
lamp
flashes for a few seconds, then
disappears.
If you want to start recording from the
reverse side, press
ª
so that the
ª
indicator lights steadily.
6
Press
∏
on the tape player to release
recording pause.
Recording starts.
To stop recording
Press
π
on the tape player.
To record
One side of the tape
Both sides*
Press DIRECTION
to select
A
ß
or RELAY
Side in recording
pause mode
To reduce noise during MW/SW (AM)
recording
If a whistling noise is heard while
recording, reorient the AM loop aerial for
optimum reception.
Recording From
Another Tape
(dubbing)
Dubbing Another Tape
Automatically
You can record an entire tape onto another
automatically by using high speed dubbing.
Use the buttons on the unit and TYPE I
(normal) or TYPE II (CrO
2
) tape for
dubbing.
1
Press FUNCTION repeatedly until
“TAPE” appears in the display.
TAPE is selected.
2
Press
§
EJECT and insert a recorded
tape in deck A with the side you want to
play facing forward.
Also, insert a blank tape in deck B with
the side you want to record on facing
forward.
Recording and playback will start from
the front side of the tape, unless you
change the playing direction before
recording.
Make sure the tabs on the cassette in
deck B have not been removed.
3
Choose how you want the tape to record
and press DIRECTION repeatedly until
the desired mode appears.
1
2
4
3
2
π
5
π
5
SYSTEM
POWER ON
SYSTEM
POWER ON