background image

13

Basic Operations

n

Listening to the radio

— Preset Tuning

3

Press TUNING MODE repeatedly
until “PRESET” appears in the
display.

MANUAL 

n

 AUTO 

n

 PRESET

4

Press /– (or /–
on the remote) to tune in the desired
preset station.

To

Do this

Turn off the radio

Press POWER.

Adjust the volume

Turn VOLUME (or press

/– on the
remote).

To listen to non-preset radio
stations

Press TUNING MODE repeatedly in step 3
until “MANUAL” appears, then press
/– to tune in the desired station.

Tips

• Pressing TUNER/BAND while the system power

is off automatically turns on the system and tunes
to the last received station (One Touch Play).

• You can switch from another source to the radio

just by pressing TUNER/BAND (Automatic
Source Selection).

• If an FM program is noisy, press STEREO/

MONO so “MONO” appears in the display. There
will be no stereo effect, but the reception will
improve. Press this button again to restore the
stereo effect.

• To improve broadcast reception, move the

supplied antennas.

Frequency

Preset number

LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K/XB30

LBT-D690/D990/XB600/XB6/XB6K

Preset number

Frequency

DISC

ALL

DOLBY NR

OFF

PRESET

TUNED

STEREO

MHz

S

DOLBY NR

OFF

TUNED

STEREO

PRESET

ALL DISC S

MHz

Before using this function, preset radio
stations in the tuner’s memory (see “Step
3: Presetting radio stations”).

1

Press POWER (

I

/

u

 for LBT-D990/

XB30) to turn on the power.

2

Press TUNER/BAND repeatedly
until the band you want appears in
the display.

Each time you press this button, the
band changes as follows:
FM 

˜

 AM

2

3

4

/–

TUNER/BAND

STEREO/MONO

VOLUME

/–

1

Содержание LBT-D290 - Compact Hifi Stereo System













































Отзывы: