Test Instructions (mech)
1277-9815
Rev
3
Sony Mobile Communications AB – Company Internal
15(32)
Tests: Service Tests
2.2.15 WLAN
Make sure there’s a WLAN network before performing
this test.
The WLAN test will be done in following sequences:
Step 1: Enable WLAN; wait 4-5 seconds, shows OK;
Step 2: Searching;
Step 3: Access points found list;
Step 4: Select the Target WLAN network, and type the
password to get connected;
Step 5: Enter a web address (e.g. Google.com);
Step 6: When connection succeeded, it shows ‘Test
Complete’.
Press the Back key to return to the Service Test Menu.
2.2.16 NFC
A NFC SIM card 3FF should be inserted in the phone
before the start of this test!
The NFC test will be done in following sequences:
Step 1: Select ‘NFC’;
Step 2: Select ‘NFC Diag Test’;
Step 3: After ‘Tag Reading…Enabled’ can be seen on the
display, bring a NFC Tag close to middle of Rear
Cover Assy.
Don’t touch each other to avoid Window Back scratch.
Press the Back key two times to return to Service Test
Menu.
2.2.17 GPS
Enter the GPS Location Test and wait for the GPS location
data.
Press the Back key to return to the Service Test Menu.
For GPS testing, refer to
1220-1333: Generic Repair Manual – mechanical
