– 5 –
KV-XA34M60
RM-954
2. DISPLAY OF STANDBY/TIMER LIGHT FLASH COUNT
3. STOPPING THE STANDBY/TIMER FLASH
Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY/TIMER lamp
from flashing.
4. SELF-DIAGNOSTIC SCREEN DISPLAY
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it
is possible to bring up past occurances of failure for confirmation on the screen:
[To Bring Up Screen Test]
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
[Screen display]
/
channel
[5]
/
Sound volume
[-]
/
Power ON
˘
Note that this differs from entering the service mode (mode volume
[+]
).
Self-Diagnosis screen display
STANDBY/SLEEP lamp
Lamp ON 0.3 sec.
Lamp OFF 3 sec.
Lamp OFF 0.3 sec.
2 times
3 times
Diagnostic Item
Flash Count*
+B overcurrent/overvoltage
2 times
Vertical deflection stopped
White balance failure
5 times
* One flash count is not used for self-diagnostic.
002 : 000
003 : 000
004 : 000
005 : 001
Numeral "0" means that no fault has been detected.
Numeral "1" means a fault has been detected.
101 : 000
SELF DIAGNOSTIC
Содержание KV-XA34M60
Страница 68: ... 86 KV XA34M60 RM 954 PRINTED WIRING BOARDS DVD SWITCH B1 DF DQP DRIVE D2 D2 Board B1 Board ...
Страница 71: ... 91 KV XA34M60 RM 954 PRINTED WIRING BOARDS VELOCITY MODULATION VM1 VM1 Board CISPR F F Board ...
Страница 72: ... 92 KV XA34M60 RM 954 J Board DVD 3D TERMINAL J MAGNETIC FIELD CORRECTION DH DH Board ...