–
31
–
KV
-EF34N90
RM-913
•
REMOVAL OF ANODE-CAP
NOTE : After removing the anode, short circuit the anode of the picture tube and
the anode cap to the metal chassis, CRT shield or carbon paint on the
CRT.
•
REMOVING PROCEDURES
1
Do not damage the surface of anode-caps with sharp shaped objects.
2
Do not press the rubber too hard so as not to damage the inside of anode-cap.
A metal fitting called the shatter-hook terminal is built into the rubber.
3
Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage the rubber.
•
HOW TO HANDLE AN ANODE-CAP
3
When one side of the rubber cap is separated from the anode button, the anode-cap
can be removed by turning up the rubber cap and pulling it up in the direction of the
arrow
c
.
2
Using a thumb pull up the rubber cap firmly in the direction indicated by the arrow
b
.
1
Turn up one side of the rubber cap in the direction indicated by the arrow
a
.
a
a
b
b
c
Anode button
8
C board
7
Chassis assenbly
9
Neck assembly
2
Speaker box(L)
assembly
4
Speaker box(R)
assembly
0
Deflection yoke
!∞
Two springs
6
Two claws
!™
Two DGC clip
!£
Two fooks
!§
Two CRT
supportor
!¢
DGC band
!§
Two DGC holder
!¡
Anode cap
!ª
Four nuts
@º
Picture tube
Cution
3
Two screws
(TP+TWH 4X25)
5
Two screws
(TP+TWH 4X25)
!¶
Demagnetization
coil
2-12. PICTURE TUBE REMOVAL
