– 31 –
KV-AW21M80
RM-GA002
Item No.
Function
Illustration
GEOM 013
Vertical Shift
(VPOS)
GEOM 011
Vertical Amplitude
(VSIZ)
Note: Adjust VSIZ to
12.6
±
(SPCB)
11.3
±
(PAL Monoscope)
11.7
±
(NTSC Monoscope)
GEOM 000
Horizontal Shift
(HPOS)
GEOM 009
EW Trapezoid
(EWTZ)
GEOM 005
EW Width (EW)
(HSIZ)
Note: Adjust HSIZ to
16.6
±
(SPCB)
14.8
±
(PAL Monoscope)
15.5
±
(NTSC Monoscope)
GEOM 002
Horizontal Bow
(HBOW)
GEOM 006
EW Parabola/Width
(EWPW)
(PW)
GEOM 007
EW Upper Corner
(UCOP)
Parabola
GEOM 008
EW Lower Corner
(LCOP)
Parabola
GEOM 001
Horizontal
(HPAR)
Parallelogram
GEOM 012
S-Correction(SC)
(SCOR)
GEOM 003
Vertical Linearity
(VLIN)
GEOM 004
Vertical Scroll
(VSCR)
3-4-2. PAL 50Hz NORMAL MODE
a) Input PAL signal 50Hz in the Service Mode.
b) Set Wide Mode to "OFF".
c) Perform the below adjustments using the "GENERAL
SETTING" sequence. (refer 3-4-1)
d) Once adjustment is done for PAL 50Hz NORMAL
MODE, set Wide mode to "ON", and copy all PAL 50Hz
NORMAL MODE adjusted data to PAL 50Hz WIDE
MODE except VSCR.
e) Now, perform adjustment for NTSC 60Hz NORMAL
MODE.
f)
Set Wide mode to "OFF".
g) Perform adjustment items listed in the above table using
the "GENERAL SETTING" sequence. (refer 3-4-1).
h) Once adjustment is completed, set Wide mode to "ON"
and copy all NTSC 60Hz NORMAL MODE adjusted data
to NTSC 60Hz WIDE MODE except VSCR.
i)
Upon completing adjustment for all modes, reconfirm
VSIZ and VPOS.