Sony KV-29FX60A, Руководство по обслуживанию

Страница: 13 / 92

13
36
When connecting an RGB source such as a Sony playstation you may need to
readjust the picture geometry.
1 Select the connected RGB source by pressing
…
repeatedly.
2 Press MENU. Select the symbol using
$
. Push to
”
.
3 Select Installation using
$
. Push to
”
to enter. Select RGB Set Up using
$
.
Push to
”
to enter.
4
Select H Centre by pushing to
”
. Adjust the centre of the picture
(range from -5 to +5) using
4
or
$
. Store by pressing OK.
5 Select H Size using
$
. Push to
”
to enter. Adjust the horizontal coordinates
(range from -5 to +5) using
4
or
$
. Store by pressing OK.
6 Press MENU to return to the normal TV screen.
Advanced Presetting
Advanced Operation
Adjusting the Picture Rotation
Because of the earth magnetism the picture might slant. In this case you can
readjust the picture.
1 Press MENU. Select the symbol using
$
. Push to
”
.
2 Select Installation using
$
. Push to
”
to enter. Select Picture Rotation using
$
.
Push to
”
to enter.
3 Adjust the Picture Rotation (adjusting range -4 to +4) by pushing to
4
or
$
.
Store by pressing OK.
4 Press MENU to return to the normal TV picture.
Adjusting the Picture Geometry
for an RGB Source
RGB Set Up
Adjust Position: Confirm: OK
H Centre O
H Size O
RGB Set Up
Adjust Position: Confirm: OK
H Centre O
H Size O
Installation
Select: Confirm: OK
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Picture Rotation
Personal ID
Demo
O
37
Using AV Preset you can select the automatic format function and label an input
source.
1 Press MENU. Select the symbol using
$
. Push to
”
.
2 Select AV Preset using
$
. Push to
”
to enter.
3 Select the desired AV input (AV 1, 2 or 3) using
4
or
$
. Push to
”
enter.
After each step you have the choice between memorizing (press OK) or going to
the next item (push to
”
).
4 For automatic format selection of the AV input:
a Push to
”
to select Auto Format.
b
Select On or Off using
4
or
$
.
5 To label the source:
a Push to
”
to select Label.
b
Select the first character using
4
or
$
. Push to
”
to confirm.
c Repeat step b to select the other 4 characters.
d Store by pressing OK.
6 Repeat steps 3 to 5 for the other AV inputs.
7 Selecting the AV3 Input Source:
In case of AV3 you have the choice between the front AV3 sockets
BC
or the
rear Scart 3
L
connector.
a Push to
$
to select AV3 Input. Push to
”
to enter.
b Select Front or Rear using
4
or
$
.
c Store by pressing OK.
8 Press MENU to return to the normal TV screen.
Presetting and Labelling of Input Sources
Advanced Presetting
Inputting Your Personal ID
You can programme your TV with a safety code, so that you can be traced if
your TV is stolen and recovered. This code can only be input once!
Make sure to write it down in this Instruction Manual.
1 Press MENU. Select the symbol using
$
. Push to
”
.
2 Select Installation using
$
. Push to
”
to enter. Select Personal ID using
$
.
Push to
”
to enter.
3 a Select the first of a total of 11 characters (letter, number, + or a blank) by
using
4
or
$
.
b Push to
”
to go to the next character.
c Repeat a and b for all characters.
4 Store by pressing OK.
5 Press MENU to return to the normal TV screen.
Advanced Operation
Installation
Select: Confirm: OK
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Picture Rotation
Personal ID
Demo
- - - - - -
AV Preset
Select Mode: Enter:
AV 3 Input Rear
INPUT LABEL AUTO FORMAT
VIDEO
VIDEO
VIDEO On
On
On AV 1
AV 2
AV 3
AV Preset
Select Mode: Confirm: OK
AV 3 Input
INPUT LABEL AUTO FORMAT
VIDEO
VIDEO
VIDEO On
On
On AV 1
AV 2
AV 3
Front
Rear