Sony KP-FX43M90A, Руководство по обслуживанию

Страница: 19 / 141

– 18 –
KP-FX43M90A
RM-1014
3-8-1. How to Select Each Mode
1. Selection of Mode Between 50 Hz and 60 Hz
50 Hz : Enter the PAL signal.
60 Hz : Enter the NTSC signal.
WIDE 60 Hz : Enter the NTSC signal MENU WIDE ON.
WIDE 50 Hz : Enter the PAL signal MENU WIDE ON.
2. Selection of DRC Mode
1) Press “DRC-MF (blue)” button on the commander, repeat-
edly until displays the mode that you want to select on the
screen.
→
DRC1250
→
DRC100
→
PROGRESSIV
Note : The DRC-MF mode is not selectable when using the
“PROGRAM INDEX” or “TWIN” mode is turned “ON”.
3. Selection of WIDE mode
1) Press “MENU” button on the commander and move “ ” up
or down to enter the “FEATURE” b “WIDE MODE”.
2) Move “ ” up or down to select “ON” or “OFF”, and push
“ (ENTER)” button.
3) Press “MENU” button to return to normal screen.
4. Selection of TWIN mode
1) Press “ (TWIN)” button on the commander.
2) Press “ (TWIN)” button again to return to normal screen.
5. Selection of INDEX mode
1) Press “PROGR INDEX” button on the commander.
2) Press “PROGR INDEX” button again to return to normal
screen.
3-8-2. How to Enter Service Mode
1. Turn on the main power switch to place this set in standby
mode (LED will light in red.).
2. Press the buttons on the commander as follows, and enter ser-
vice mode.
3. After entering service mode, reset current aadjustment data.
Then turn off the power switch.
4. Turn on the main power switch and enter mode again as step 2
above.
Enter the
“Service mode”
5
(DIGIT 5) () ON SCREEN
DISPLAY
( )
TV
STANDBY
( )
Enter the
“Reset”
8
(DIGIT 8) (ENTER)
RM-1014
3-8. ADJUSTMENTS WITH COMMANDER
Service adjustment to this model can performed with the supplied
remote commander RM-1014.
50 Hz 60 Hz WIDE 60 Hz WIDE 50 Hz
(PAL) (NTSC) (NTSC) (PAL)
DRC1250 a a a a
DRC100 a a a a
TWIN a a X X
INDEX a a X X
1 2 3
4 5 6
7 8 9
0
JUMP
PROGR
MENU
PIC
MODE
DRC-MF
SOUND
MODE
WIDE
MODE
SURROUND
RESET
TV
HD/DVD
Copy PAL data
to NTSC
Adjustment item
up
Adjustment item
down
User control goes
to the standard state
Write data to NVM
Read data from
NVM
Initialize data
(Not stored)
Data down
Data up
Copy data to all
mode
Up : Category up
Down : Category down
Push : Enter
Change
the PICTUER MODE
blue