Sony KP-ES43HK1, Руководство по обслуживанию

Страница: 69 / 166

– 69 –
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1,
ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1 K
RM-961
5. INDEX 50 Hz (PAL) Mode
1) Enter the PAL SPCB signal, and set in the service mode.
2) Press “PROGR INDEX” button on the commander to set the
INDEX mode.
3) Confirm and set the following data.
Condition :
Category Item Data
GEO 00 VSZ
01 VPS
02 VLN
03 SCO
04 HSZ
05 HPS
07 PAP
08 UPN
09 LPN
0A TRZ
0B AGL 07
0C BOW 07
15 VSC 1F
MID 00 HPH 78
01 VPH 1A
4) Select the category “GEO” and the item “05 HPS” to adjust
the horizontal position, and select the item “01 VPS” to ad-
just the vertical position.
Same as
DRC1250
50 Hz (PAL)
mode
5) Press “ (MUTE)”+“
-
” buttons on the commander to
write the data to the NVM.
H1 H2
V2
V1
V1 – V2 =
±
0.1 sq.
H1 – H2 =
±
0.1 sq.
6. DRC1250 60 Hz (NTSC) Mode
1) Enter the NTSC monoscope signal, and set the DRC1250.
2) Set in the service mode, and write the following data to
NVM.
Condition :
Category Item Data
GEO 0B AGL 07
0C BOW 07
15 VSC 22
MID 00 HPH 49
01 VPH 25
3) Adjust the main deflection. (Refer to 6-5-2.)
4) After the Main Deflection Adjustment finished, press “
(MUTE)”+“
-
” buttons on the commander to write the data
to the NVM.
5) Select the category “GEO” and the item “19 CPY”, and set
the data to “01”.
Press “ (MUTE)”+“
-
” buttons to copy GEO data to
other 60 Hz modes
Input Signal H SIZE V SIZE
NTSC monoscope 15.7 ± 0.1 sq. 11.8 ± 0.1 sq.
SPEC
Overscan Spec. = 7.5%
DRC100
(60 Hz)
PIP
(60 Hz)
DRC1250
(60 Hz)
TWIN
(60 Hz)
INDEX
(60 Hz)
Copy GEO Data.
6) Adjust the sub deflection (Projector Engine Adjustment).
(Refer to 6-5-3.)
7) After the Projector Engine Adjustment finished, press “
(MUTE)”+“
-
” buttons on the commander to write the data
to the NVM.