21
GB
KLV-46S200A
2-685-864-
14
(1)
Usi
ng ME
NU
F
unctio
ns
Dual Sound
Selects the sound from the speaker for a stereo or bilingual broadcast.
The selection varies, depending on the Broadcasting.
.
Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select “Mono”. The sound
becomes monaural, but the noise is reduced.
• The “Mono” setting is memorized for each program position.
• You cannot receive a stereo broadcast signal when “Mono” is selected for the program
position.
• You cannot receive stereo or dual sound when “Low” or “High” is selected in “Audio Filter”
(page 27).
Tips
• NICAM is receivable in following countries/regions. Hong Kong, Singapore, New Zealand,
Malaysia, Thailand, etc.
• A2 (German) is receivable in following countries/regions. Australia, Malaysia, Thailand,
etc.
• If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “Main” or
“Sub”.
Broadcasting
Selection
NICAM stereo
NICAM (stereo sound)
Mono (regular sound)
NICAM bilingual
NICAM Main (main sound)
NICAM Sub (sub sound)
Mono (regular sound)
NICAM monaural
NICAM Main (main sound)
Mono (regular sound)
A2 (German) stereo
Mono (regular sound)
Stereo (stereo sound)
A2 (German) bilingual
Main (main sound)
Sub (sub sound)
010COV.book Page 21 Thursday, September 7, 2006 1:39 PM
