Sony KLV-40S550A - BRAVIA 40" 1080p Multi-System LCD TV. Dual Voltage, Руководство по эксплуатации

Страница: 39 / 40

39
GB
F:\SONY STM\Sony STM 2009 Jobs\Grp S1\JC090195_4135850121 Grp
S1 GB Rev 2\4135850121\090ADD.fm
masterpage:Left
KLV-52/46/40/32V550A/40/32V530A/40S550A
4-135-850- 12 (1)
Additional Information
No picture from the connected
equipment appears on the
screen. • Turn the connected equipment on.
• Check the cable connection.
• Press
to display the list of inputs, then select the desired input.
• Correctly insert the memory card or other storage device in the digital
still camera.
• Use a digital still camera memory card or other storage device that has
been formatted according to the instruction manual supplied with the
digital still camera.
• Operations are not guaranteed for all USB devices. Also, operations
differ depending on the features of the USB device and the video being
played.
You cannot select the
connected equipment on the
Home Menu or you cannot
switch the input. • Check the cable connection.
Sound
The picture is good, but there
is no sound. • Press
2 +/–
or
%
(Mute).
• Check if the “Speaker” is set to “TV Speaker” (page 29).
No sound or noisy sound • Check if the TV system setting is appropriate (page 31).
Channels
Some channels are blank. • The channel is for scrambled/subscription service only. Subscribe to a
pay TV service.
• The channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.
General
The TV turns off
automatically (the TV enters
standby mode). • Check if the “Sleep Timer” is activated, or confirm the “Duration”
setting of “On Timer” (page 24).
• Check if the “Idle TV Standby” is activated (page 24).
The TV turns on
automatically. • Check if the “On Timer” is activated (page 24).
Some input sources cannot be
selected. • Select “Video Labels” and cancel the “Skip” setting for the input source
(page 29).
The remote does not function. • Replace the batteries.
HDMI equipment does not
appear on “HDMI Device
List.” • Check that your equipment is compatible with control for HDMI.
You cannot select “Off” in
“Control for HDMI”. • If you have connected any audio system that is compatible with control
for HDMI, you cannot select “Off” in this menu. If you want to change
the audio output to the TV speaker, select “TV Speaker” in the
“Speaker” menu (page 29).
Not all channels are tuned for
cable. • Check the support website for cable provide information.
http://www.sony-asia.com/bravia/flash.html
Condition Explanation/Solution