28
GB
KLV-40/37/32S310A
3-271-680-
12
(1)
PC Settings menu
z
You can refer to PC Input Signal Reference Chart (page 32) for supported signals and “Resolution:” value displayed.
You can select the options listed below on the “PC
Settings” menu. To select options in “Settings”, refer
to “Navigating through menus” (page 18).
Wide Mode
Selects a screen mode for displaying input from your PC.
“Normal”:
Displays the picture in its original size.
“Full 1”:
Enlarges the picture to fill the display area, keeping its original horizontal-
to-vertical aspect ratio.
“Full 2”:
Enlarges the picture to fill the display area.
Reset
Resets all the “PC Settings” except “Wide Mode” and “Power Management” to the
factory settings.
Auto Adjustment
Automatically adjusts the display position and phase of the picture when the TV
receives an input signal from the connected PC.
z
“Auto Adjustment” may not work well with certain input signals. In such cases, manually
adjust “Phase”, “Horizontal Shift” and “Vertical Shift”.
Phase
Adjusts the phase when the screen flickers.
Pitch
Adjusts the pitch when the picture has unwanted vertical stripes.
Horizontal Shift
Adjusts the horizontal position of the picture.
Vertical Shift
Adjusts the vertical position of the picture.
Power Management
Switches the TV to standby mode if no signal is received for 30 seconds.
Off
010COV.book Page 28 Tuesday, September 18, 2007 8:59 AM
