manualshive.com logo in svg

Sony KLV-26S400A - 26" Multi-System HDTV LCD TV, Руководство пользователя

Поделиться
Скачать
Sony KLV-26S400A - 26

D:\Chinmeng\SONY-LCD\SY0109_3293042111\3293042111\3293042111_GB\01GB01BAS_GB.fm

2

(GB)

KLV-26S400A/3-293-042-

11

(1)

English

GB

To Customers:

For product protection and safety reasons, Sony strongly 
recommends that installing of your TV be performed by Sony 
dealers or licensed contractors. Do not attempt to install it 
yourself.

Your KLV-26S400A can be installed using SU

­

WL100 Wall-

Mount Bracket (sold separately). Please provide your licensed 
contractor with this installation supplement as well as the 
Instructions (supplied with the SU

­

WL100 Wall-Mount 

Bracket). Read these documents carefully for safety and 
proper installation.

To Sony Dealers and Contractors:

Provide full attention to safety during the installation, 
periodic maintenance and examination of this product.

Installing the TV

The TV can be installed on a wall by attaching a Wall-
Mount Bracket (sold separately).
Verify your TV’s model number and be sure to use the 
bracket specified for your model only. Refer to the 
steps on this manual along with the Instructions 
supplied with the SU

­

WL100 Wall-Mount Bracket, to 

properly carry out the installation.

Open the Wall-Mount Bracket package and check the 
contents for all required parts along with the 
Instructions.

Refer to the Instructions for the SU-WL100.

Decide where you want to install your TV. Refer to the 
last 2 pages of this manual for the TV installation 
dimensions and determine the location.

Refer to the Instructions for the SU-WL100.

Refer to the Instructions for the SU-WL100.

Sufficient expertise is required for installing this 
product, especially to determine the strength of the 
wall for withstanding the TV’s weight. Be sure to 
entrust the attachment of this product to the wall to 
Sony dealers or licensed contractors and pay 
adequate attention to safety during the installation. 
Sony is not liable for any damage or injury caused 
by mishandling or improper installation.

Step 1: Checking the parts 

required for the 
installation

Step 2: Adjusting the position 

of the holders of the 
Base Plate

Step 3: Deciding on the 

installation location

Step 4: Installing the Base 

Plate on the wall

KLV26S400A_GB.book  Page 2  Thursday, March 6, 2008  1:24 PM

Содержание KLV-26S400A - 26" Multi-System HDTV LCD TV


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды