– 16 –
28
Cleaning of the Air Filter
Periodic cleaning of the air filter is necessary. Clean the air
filter once a month. When the filter becomes old and dust
remains on the filter even after cleaning, replace it with a new
one.
• Clean the air filter periodically. If you don’t clean, it may
cause internal heat build-up.
• Never use an air filter which is torn or has holes. Attach the
filter firmly with six tabs. If dust enters the TV, the picture
may become dark.
1
Turn off the power and disconnect the
power cord.
2
Remove the front panel.
Remove the front panel without moving the TV.
Grasping the side of the front panel with your fingers, pull
it forward. Be careful not to catch your fingernails.
3
Pull the filter upward and remove it.
4
Clean the dust with a vacuum cleaner.
5
Attach the filter.
Attach the six tabs securely.
6
Attach the front panel.
Be careful not to damage the speaker.
Notes
• Attach the filter firmly. If it is not firmly attached, the power will not
turn on.
• Remove the supplied filter in the same way as the attached filter.
• Consult your nearest Sony service center to obtain a new filter.
vacuum cleaner
Supplied filter
29
3
Loosen the screw with the object such as a
coin and remove the lamp cover.
4
Loosen two screws and pull out the lamp.
The lamp is still too hot just after the power is turned off.
Be careful that you don’t touch the front glass or
surrounding area of the lamp or the glass of the lamp
compartment.
Loosen two screws with the supplied wrench.
Pull out the lamp by the handle.
5
Attach the new lamp.
Fasten two screws tightly.
6
Attach the lamp cover.
Fasten the screws tightly.
7
Attach the front panel.
Be careful not to damage the speaker.
Notes
• Do not touch or stain the front glass of the new lamp or the glass of
the lamp compartment. If the glass become dirty, the picture quality
may deteriorate or the lamp life may shorten.
• Attach the lamp cover firmly. If it is not firmly attached, the power will
not turn on.
• When the lamp burns out, a noise is audible. This does not represent
a damage.
• Consult your nearest Sony service center to obtain a new lamp.
Replacing the Lamp
When the lamp becomes dark or the picture colour is not
normal, replace with a new lamp.
• Use the lamp XL-100E for replacement. If you use another
lamp, it may cause damage to the TV.
• Do not remove the lamp except when replacing it.
• Before replacing the lamp, turn off the power and disconnect
the power cord.
• Replace the lamp after it becomes cool. The front glass of
the lamp remains 100 °C (212 °F) and more even 30 minutes
after the power is turned off.
• Do not place the removed lamp in proximity to children or
flammable material.
• Do not get the removed lamp wet, or insert objects inside the
lamp. It may cause the lamp to explode.
• Do not place near metal or easily flammable objects, as this
may cause fire. Also, do not put your hand inside the lamp
compartment, as you may be burned.
• Attach the new lamp firmly. If it is not firmly attached, the
picture may become dark.
1
Turn off the power and disconnect the
power cord.
Replace the lamp 30 minutes or more after the power is
turned off.
Prepare the new lamp.
2
Remove the front panel.
Remove the front panel without moving the TV.
Grasping the side of the front panel with your fingers, pull it
forward. Be careful not to catch your fingernails.
Содержание KL-37W2U
Страница 32: ... 32 KL 37W2 37W2K RM 838 KL 50W2 50W2K 50W2U RM 838 MEMO ...
Страница 33: ... 33 34 35 36 SECTION 4 DIAGRAMS 4 1 BLOCK DIAGRAMS ...
Страница 34: ... 37 38 39 40 ...
