Other Information
86
KF-42/50WE620
2-108-981-
11
(1)
General
Problem
Possible Remedies
How to restore Video settings
to factory settings
❏
Press
RESET
on the remote control while in the Video menu (see page 60).
How to restore Audio settings
to factory settings
❏
Press
RESET
on the remote control while in the Audio menu (see page 63).
Cannot cycle through the other
video equipment connected to
the TV
❏
Be sure the
Video Label
option is not set to “Skip” (see page 74).
Cannot operate Menu
❏
If a menu option appears in gray, this indicates that the menu option is not
available.
Lost password
❏
In the password screen (see page 69), enter the following master password:
4357
.
The master password clears your previous password; it cannot be used to
temporarily unblock channels.
LED on the display unit is lit
❏
The POWER/STANDBY indicator lights up when the TV is turned on. If the LED
blinks continuously, this may indicate the TV needs service.
❏
The TIMER indicates that the timer is set. When the timer is set, this LED will
remain lit even when the LCD projection TV is turned off.
LCD projection TV is fixed to
one channel
❏
Use
Auto Program
in the Channel menu to add receivable channels that
are not
presently in the TV’s memory (see page 67).
❏
Check your
Channel Fix
settings (see page 67).
01COV.book Page 86 Friday, June 11, 2004 9:05 AM