KE-MR42/50M1(CH)
2-6
2-1-10. AD Adjustment of Component (15k) System
1)
Set input to AV4 (or 5).
2)
Input component PAL 50% window Signal 90IRE in AV4 (or 5).
3)
Set picture quality mode to [PC/GAME].
Send “RGB Level” Command.
4)
Adjust Y_OUT_LEVEL until the Green detection value is within a setting value.
Detection setting value: 197 ±3
5)
Set Video Signal to component PAL 50% window 20IRE.
6)
Adjust Cb_OFFSET2 until the detection value of Blue becomes same as that of Green.
7)
Adjust Cr_OFFSET2 until the detection value of Red becomes same as that of Green.
8)
Repeat step 6-7 until it is in a detection setting value of 8).
Detection setting value: 44
R,G,B detection value dispersion: ±1
9)
Repeat step 2-7 until it is in the detection setting value of 4) and 8).
10) Input component PAL 75% Color Bar signal into “AV4 (or 5)”.
11) Adjust C_OUT_LEVEL until the detection value of (A) becomes same as that of (D), as
shown in the figure 2.
+2
–6
75% Color Bar
(A)
(B)
(C)
(D)
x
x
x
x
Wh Ye Cy G Mg R
Bl Bk
Cautions :
figure (1)
The position of (A) excepts between
for 1/16 from an edge.
(A)
(B)
(C)
(D)
figure (2)
ML board CN304
3
pin
Blue output
想了解更多的资料请登陆图纸手册交流网站
(http://schematic.5d6d.com)
