11
G
e
tting Started
When using other TV stands
1
Screw the support belt (supplied) to the TV
stand with a wood screw (supplied).
2
Attach the support belt to the Table-Top Stand
with the securing screw (supplied) using a
coin, etc.
3
Adjust the length by pulling the support belt
toward you while holding the Table-Top
Stand.
~
• Be sure to take measures to prevent the TV from
toppling over and causing injury.
• The supplied wood screw may not be used depending
on the type of TV stand. In this case, or when the
securing strength is not enough, use commercial
screws
1
/
8
to
3
/
16
inch (3 to 4 mm) diameter to fit to the
TV stand. Consult your dealer about the types of
screw(s).
Keep your TV at least 4 inches (10 cm) away from
the wall to provide proper ventilation. Blocking
the ventilation opening of the cooling fan may
damage the TV.
~
• Do not install the TV near any ventilation, as it may
affect the normal TV operating temperature.
• Be sure that the ventilation opening on the side of the
TV is not blocked by curtains or other materials.
• Dirt may accumulate near the ventilation when the TV
is placed against the wall depending on its material.
2
3
3
1
TV
stand
Table-Top
Stand
When Installing Your TV against a Wall
12 inches
(approx. 30 cm)
4 inches
(10 cm)
4 inches
(10 cm)
Never install the TV as follows:
Air circulation is blocked.
Air blown into cooling fan.
