KDL-70X830B 13
SECTION 3 - REPAIR INFORMATION
REPAIRING THE TV
If the latest Software does not correct the issue, complete the following:
1. Verify the television has the symptom the customer indicated.
2. Replace part causing the symptom.
3. Install the latest version of Software (Required for ALL repairs).
4. Perform the required service adjustments and checks.
5. Verify the repair resolved the issue.
REMOVING THE CAMERA MODULE AND
TABLE-TOP STAND
1.
Place TV in a standing position on a flat surface.
1. Locate and remove 1 screw and disconnect 1 connector from
the Camera Module to lift as shown and detach from TV.
2.
Place TV face down on a flat and soft surface.
Locate and remove the screws as shown to detach the Right and Left
Stand.
REMOVING THE REAR COVER
1. Remove 1 screw from the AC, Cover and lift to detach, then disconnect
the connector and slide it left as shown.
2. Locate and remove all screws from the Rear Cover.
