Sony KDL-50R550A, Руководство по эксплуатации

Страница: 71 / 84

71
O
the
r Inform
ation
No sound / Noisy sound
No sound but good
picture • Check the volume control.
• Press
MUTING or VOL + so that “Muting” disappears from the
screen (see page 23).
• Set Speakers to TV Speakers in the Sound settings (see page
52). If it is set to Audio System , sound is not output from the TV’s
speakers regardless of the TV’s volume control.
• When using HDMI input with Super Audio CD or DVD-Audio,
DIGITAL AUDIO OUT (OPTICAL) may not provide an audio
signal.
• When tuned to a digital channel with Alternate Audio , the
broadcaster may not be broadcasting your preferred Alternate
Audio language. Press OPTIONS , highlight and select Alternate
Audio , and change the Alternate Audio language (see page
52).
Audio noise • Make sure that the antenna is connected using a 75-ohm coaxial
cable (not supplied).
• Keep the antenna cable away from other connecting cords.
• To avoid TV interference, make sure to use an undamaged
antenna cable.
No audio or low audio
with Home Theater
System • Set Speakers to Audio System in the Sound settings (see page
52).
• Set Audio Out to Fixed in the Sound settings (see page 52).
No color / Irregular
picture • Verify that the
Video/Component Selection
(see page 63) is set
to the current input type in use. We suggest leaving this setting to
Auto .
BRAVIA Sync
Cannot find connected
BRAVIA Sync
HDMI/
MHL device
• Make sure that the BRAVIA Sync Control is set up on both the
TV and the optional device compatible with
BRAVIA Sync
(see
page 26).
Second A/V receiver is
not listed on the
BRAVIA
Sync Device List
• Only one A/V receiver may be used with the BRAVIA Sync and
BRAVIA Sync Control functions at one time (see page 64).
PC connection
No picture / No signal • Confirm the PC is correctly connected to the TV with the HDMI
IN.
• Ensure the output signal from the PC is one of the formats listed
on page 67.
• Turn the PC off. Confirm the PC connection and restart the PC.
Plug-and-play will auto-detect the TV and correctly set up PC
timing.
• Verify the PC is not in standby or hibernation mode.
Poor Picture • Adjust the resolution (see page 67).
Condition Explanation/Solution
(Continued)