KDL-40NX700/46NX700
12
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts of an assembly are indicated by the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
*
Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
(Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
A Remove 4 screws from
Table-Top Stand Assembly
B Lift up TV set to detach from
Table-Top Stand Assembly
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
C Gently place the TV set face down onto a soft cloth
1
X-2546-759-1
BASE (L1) ASSEMBLY (GM)
(KDL-46NX700 ONLY))
1
X-2546-758-1
BASE (ML1) ASSEMBLY (GM)
(KDL-40NX700 ONLY))
2
4-170-474-21
COVER, NECK (ML1 FRONT)
3
4-170-481-21
COVER, NECK (ML1 REAR)
4
4-170-445-01
NECK (ML1)
5
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01
SCREW, +PSW M5X16
B
A
Soft Cloth
C
1
4
2
3
5