
- 13 -
2-12. G5 Board Removal (52 inches)
2-13. HL4A Board Removal
2-14. HSN Board Removal
The ‘HL4A’ board can then be removed by releasing the 2
clips circled.
Clips
To remove the ‘HSN’ board disconnect the 1 connector and
release the 1 clip circled, then ease the board gently away
from the back of the TV set.
Clip
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8
To remove the ‘G5’ board disconnect all the connectors and
remove the 4 screws circled, then ease the board gently
away from the back of the TV set.
Screws
2-15. IP1 Board Removal (40 inches)
Screws
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8
To remove the ‘IP1’ board disconnect all connectors and then
remove the 4 screws circled and ease the board gently away
from the back of the TV set.
Note:
Refer to page 4 - Hirose MDF61 connector.
To remove the ‘HL4A’ board first remove the ‘Rear Cover’
(See Sec 2-2-1) the Stand Assy (See Sec 2-2-4) and then the
‘Under Cover’ (See Sec 2-2-5). The ‘Guide, Led’ can then be
removed by disconnecting the 1 connector and releasing the
1 clip circled.
Clip