manualshive.com logo in svg

Sony JunboTron JME-SA200, Руководство по эксплуатации

Поделиться
Скачать
Sony JunboTron JME-SA200 Скачать руководство пользователя страница 11

Overview

11

Power Source

The NP-F750 rechargeable battery pack (not supplied) is used for the
power source of this unit.
Before attaching the battery pack, charge it using the AC-V615 AC power
adaptor (not supplied).

For charging and details of the use of the battery pack, refer to the Operating
Instructions supplied with the rechargeable battery pack and the AC power
adaptor.

Attaching the battery pack

Attach the battery pack to the battery pack compartment on the rear of the
unit.
Insert the battery pack as shown and slide it in the direction of the arrow.
The battery pack is locked in position.

Check the direction
of the 

“

 mark.

Note

After attaching, confirm that the battery pack is locked firmly.  If the
battery pack is not locked, it may fall during operation and the adjustment
data may be lost.

Battery charging time

When charging the exhausted battery pack using the AC-V615 AC power
adaptor, the following charging time is required.

Normal charging time: Approx. 3 hours 30 minutes
Full charging time:  Approx. 4 hours 30 minutes

The normal charging time is the time until the charging lamp on the AC
power adaptor goes out.  The full charging time is the time until the battery
pack is fully charged, giving a longer battery life.

Battery life

When the fully charged battery back is used continuously under normal
temperatures, the following battery life is obtained.

When the LCD display window is backlighted:  Approx. 3 hours
When the backlight is turned off:  Approx. 3 hours 10 minutes

The battery life may vary depending on the ambient temperature or the
battery condition.

Power Source and Connections

Содержание JunboTron JME-SA200





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды