S
e
tu
p
s
–
U
s
in
g A
d
mini
st
ra
to
r T
o
ol
Setting the Camera Information (Camera information Dialog)
42
5
Click the
Apply
button to save the settings on the
Camera Information
dialog.
Click the
Close
button to close the dialog without
saving the settings.
Note
Saving fails if the IP communication with the
camera is not established. In this case, check the
network condition and try again.
6
Click the
Details
button of the camera you use, and
set the items in the details dialog.
For the details dialog, see page 43.
7
Click the
Apply
button to save the settings in the
details dialog.
The details dialog closes.
Click the
Cancel
button to close the details dialog
without saving the settings.
Camera information Dialog
Panorama camera installation position select
box
Select the installation position of the panorama camera.
The following four options are available. Select
Low
position
if the panorama camera is installed in a place
lower than 3 m above ground.
Panorama camera downward, High position
Panorama camera downward, Low position
Panorama camera upward, High position
Panorama camera upward, Low position
Easy setting button
Click this button to set the IP address of the camera
automatically.
For details, see “Connecting the Camera to an Exclusive
Network” in Preparations chapter on page 9.
Information on the panorama camera
Use panorama camera checkbox:
Select this
checkbox when you use the panorama camera.
IP address box:
Enter the IP address of the panorama
camera.
Port No.:
Enter the port number of the panorama
camera.
Details button:
Click to display the details dialog of the
panorama camera.
Information on the zoom camera
Use zoom camera checkbox:
Select this checkbox
when you use the zoom camera.
IP address box:
Enter the IP address of the zoom
camera.
Port No.:
Enter the port number of the zoom camera.
Details button:
Click to display the details dialog of the
zoom camera.
Information on fixed camera 1
Use fixed camera 1 checkbox:
Select this checkbox
when you use fixed camera 1.
IP address box:
Enter the IP address of fixed camera 1.
Port No.:
Enter the port number of fixed camera 1.
Details button:
Click to display the details dialog of
fixed camera 1.
Information on fixed camera 2
Use fixed camera 2 checkbox:
Select this checkbox
when you use fixed camera 2.
IP address box:
Enter the IP address of fixed camera 2.
Port No.:
Enter the port number of fixed camera 2.
Details button:
Click to display the details dialog of
fixed camera 2.
Panorama camera
downward
Panorama camera
upward
Содержание Ipela XI's XIS-10DC
Страница 53: ...XIS 10DC Sony Corporation ...
