Alarm Functions
Motion Detection*/Alarm Trigger
The SNC-P1 is equipped with a built-in motion
detection function that can generate an alarm
through an alarm-output port or trigger various
actions. Unlike conventional activity detection,
the SNC-P1 uses vector information to detect
motion, achieving robustness against noise
components. The SNC-P1 is also equipped with
an sensor-input port that can receive a trigger
from an external sensor.
*
The motion detection function is available only with
MPEG-4 compression.
Pre-/Post-Alarm Image Storage
With the built-in buffer memory, the SNC-P1 can
store several seconds of pre-alarm and post-alarm
still images when an alarm is triggered by the
motion detection, the sensor input, or both.
Image storage capacity
MPEG 4 image: Approx. 30 s* (pre-/post- 15 s)
*when the image size is 320 x 240 at a frame rate of
30fps and a bit rate of 512 kbps
JPEG image:
Approx. 10 s* (pre-/post- 5 s)
*when the image size is 320 x 240 at a frame rate of
15fps and the image quality is set to Level 3
Image Transfer Using FTP/SMTP*
The pre-/post-alarm images stored at the time of
an alarm event can be transferred to an FTP
server for later viewing.
Also, when the unit is set to JPEG mode, still
images can be sent to a specified e-mail address,
enabling the user to view images that were shot
at the time of the alarm
*
All images transferred using SMTP are in JPEG format.
Setup Viewer: Easy mode
Setup Viewer: Advanced mode
User-Friendly Controls
The SNC-P1 has been designed with special care to ensure
simple operation. Setup parameters are organized in a
two-layer menu system, categorized into an Easy Mode
and an Advanced Mode. Easy Mode allows access to only
the standard setup functions, while Advanced Mode allows
access to all setup functions.
Settings can be easily adjusted using a user-friendly GUI on
the PC monitor.
MK10158V2.qxd 05.6.16 2:03 PM Page 6
