A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Camera Image — Camera Menu
41
• The maximum size of a cropped image is 1280 × 720
(SNC-CH210/DH210/DH210T)/1280×960
(SNC-CH110) pixels.
To crop an image
1
Set
Cropping
to
On
and click the
Area setting
button.
The area setting window appears.
2
Setting the trimming portion
Hold down the left button of the mouse on the still
image and drag the cursor diagonally. The area in a red
frame is the trimming portion.
3
Click
OK
at the bottom of the window.
The cropped image is displayed on the main viewer.
4
To close the image, click
in the upper-right
corner.
SolidPTZ
Select
ON
to enable the SolidPTZ function.
Notes
• SolidPTZ is not available when Cropping is enabled.
• When
Aspect ratio
in the System menu- Installation
tab is set to
16:9
, this function is not available.
• When
SolidPTZ
is set to
On
, the motion detection
function is not available.
• When
SolidPTZ
of
Image 1
is set to
On
,
SolidPTZ
of
Image 2
can be set to
On
.
SolidPTZ priority
When
SolidPTZ
is set to
On
, select
Resolution
or
Frame rate
. When you use the SolidPTZ function,
select
Resolution
to zoom the image clearly, or select
Frame rate
to shoot high-speed subjects.
Notes
•
SolidPTZ priority
setting is not available on the
SNC-CH110.
• You cannot select
SolidPTZ priority
for Video 2
since the setting value for Video 1 is applied to Video
2.
Codec
Select
JPEG
,
MPEG4
,
H.264
or
OFF
. Note that Image
1 cannot be set to
Off
.
Notes
• The selectable size of images and frame rate for
Image 2 may be limited depend on the setting of codec
type, size of images and/or frame rate for Image 1.
• Motion detection function is not available when Image
2 is set to other than
Off
.
Image size
You can select the size of images sent from the camera.
The selectable image sizes depend on the aspect ratio
setting in the installation tab. For details on selecting
aspect ratio, refer to “Installation tab” in “System menu”
in page 36.
The selectable image sizes for Image 1 and Image 2 are
as follows:
Notes
• 2048 × 1536 image size can only be selected when the
codec is JPEG.
• Some image sizes for Image 2 cannot be configurable
if the size is not the same as Image 1.
Therefore, when an image size of Image 1 is changed,
the image size of Image 2 may be changed
automatically.
Aspect ratio [4:3]
a
: Configurable.
×
: Not configurable.
f
: Configurable
only when Image 1 is this image size.
SNC-CH210/DH210/DH210T
Image 1
Image 2
2048 × 1536
a
×
1920 × 1080
×
×
1600 × 1200
a
×
1680 × 1056
×
×
1440 ×
912
×
×
1376 ×
768
×
×
1280 ×
1024
a
×
1280 ×
960
a
×
1280 ×
800
×
×
1280 ×
720
×
×
1024 ×
768
a
f
1024 ×
576
×
×
800 ×
480
×
×
768 ×
576
a
f
720 ×
576
a
f
704 ×
576
a
f
720 ×
480
a
f
640 ×
480
a
a
640 ×
368
×
a
384 ×
288
a
a
352 × 288
a
a
320 ×
240
a
a
320 ×
192
×
a
176 × 144
a
a
