Sony Ipela PCS-TL50, Руководство по эксплуатации

Страница: 268 / 283

268
Specifications
TERMINAL connector (PCSA-
DSB1S/PCS-DSB1)
D-sub 15-pin connector (male)
When connecting one-to-one
(Default)
When “Port Number Used” is set to
“Default” in the LAN Setup menu, the PCS-
TL50 uses the following port numbers.
When connecting one-to-one
(Custom: TCP Port Number 3000
and UDP Port Number 3000)
When “Port Number Used” is set to
“Custom” in the LAN Setup menu, the PCS-
TL50 uses the port numbers defined by the
values entered in “TCP Port Number” and
“UDP Port Number”.
For example, when “TCP Port Number” is
set to “3000” and “UDP Port Number” is set
to “3100”, the PCS-TL50 uses the following
port numbers.
9 DX+ Receive data+
10 DX– Receive data–
11 TX Serial transmit data
12 RX Serial receive data
13 19.5V 19.5V
14 GND Ground
Pin Signal Description
1 Video Video signal
2 Video.GND Video signal ground
3 LINE A+ Line audio+
4 LINE A– Line audio–
5 MIC+ Mic
6 MIC– Microphone–
7 RD+
8 RD– Receive–
9 19.5V 19.5V
10 NC –
11 AGND Analog ground
12 NC –
13 TD+ Transmit data+
14 TD– Transmit data–
15 GND Ground
Pin Signal Description
9 15
1 8
List of Port Numbers Used on
the PCS-TL50
Signal Port number
RAS (PCS-TL50) Any number from 2253
to 2255 (using
GateKeeper)
RAS
(GateKeeper) 1718 or 1719 (using
GateKeeper)
Q.931 (dial) Any number from 2253
to 2255
Q.931 (answer) 1720
H.245 Any number from 2253
to 2255
Audio RTP 49152
Audio RTCP 49153
Video RTP 49154
Video RTCP 49155
FECC RTP 49156
FECC RTCP 49157
Data conference
RTP 49158
Data conference
RTCP 49159