Sony IPELA PCS-HG90, Руководство по эксплуатации

Страница: 26 / 200

26
Turning the System On/Off
To save power, the Communication Terminal can enter standby mode if you
do not operate it for a specified period of time.
When the Communication Terminal is in standby mode, the STANDBY
indicator on the Camera Unit and the POWER/STANDBY indicator on the
Communication Terminal light in orange.
You can turn on the Video Communication System with any button on the
Remote Commander if it is in standby mode.
Once the Communication Terminal receives a call, the standby mode is
automatically released.
1
Display the launcher menu on the monitor screen, then press the @ / 1 button
on the Remote Commander.
The message “Standby?” appears on the monitor screen.
2
Press the
B
or
b
button on the Remote Commander to select “OK”, and
press the PUSH ENTER button.
You may press the
@
/
1
button on the Remote Commander.
The Video Communication System enters standby mode and the STANDBY
indicator on the Camera Unit and the POWER/STANDBY indicator on the
Communication Terminal light in orange.
When the Communication Terminal and the Camera Unit are separately installed,
point the Remote Commander to the Camera Unit for operations.
Standby Mode Function
Setting the Video Communication System to Standby Mode
Note
MIC
ON/OFF
VOLUME ZOOM
PRESENTATION
DISPLAY
PUSH
ENTER
CONNECT/
DISCONNECT
VIDEO INPUT
RETURN MENU
CLEAR SYMBOL
PinP FAR/NEAR
BACK
SPACE
ALPHA/
NUM
STANDBY indicator
(Lights in orange.)
POWER/STANDBY
indicator (Lights in orange.)
@
/
1
button
B / b buttons and
PUSH ENTER button