Sony Ipela PCS-G50, Руководство по эксплуатации, Страница: 133 / 259

133
Using Multiple Microphones
Using Multiple Microphones
You can connect several optional PCS-A1 (supplied) or PCSA-A3 (not
supplied) microphones to the system, allowing more people to participate in
the conference.
To connect the optional microphones
Connect the optional microphones to the MIC 1 and MIC 2 connectors on the
Communication Terminal. Power is supplied to the microphones from the
terminal.
To use the connected microphone
Set “Mic Select” to “MIC” on page 1 of the Audio Setup menu.
(See page 53.)
Notes on installation of the microphones
• Install microphone about 50 cm away from the participants.
• Install the speakers behind the microphones.
• Place the microphone in a quiet, echo-free location.
• Install microphones away from equipment that may cause noise.
• Avoid covering a microphone with paper, etc., or moving it. If you do either,
extreme noise and echo may be heard temporarily by the remote party. In this
case, wait until the echo disappears.
TERMINAL VISCA OUT
(MIXED) AUX
AUX MONITOR
LINE
AUX CONTROL
VIDEO OUT
AUDIO OUT AUDIO IN
MIC
VIDEO IN
EC-MIC
CTRL-S
RGB OUT DSB
ISDN UNIT
IR OUT
1 2
1 2
1 2
1 2
DC 19.5V
CAMERA AUX IN
WHITE
BOARD
100BASE-TX/
10BASE-T
(PLUG IN POWER)
to MIC 2
to MIC 1
PCS-A1 (supplied) or PCSA-A3 microphone
(not supplied)