Sony ILCE-7RM3, Руководство пользователя

Страница: 436 / 464

On moisture condensation
If the product is brought directly from a cold to a warm location, moisture may condense inside or outside the product. This
moisture condensation may cause a malfunction of the product.
To prevent moisture condensation when you bring the product directly from a cold to a warm location, first put it in a plastic
bag and seal it to prevent air from entering. Wait for about an hour until the temperature of the product has reached the
ambient temperature.
If moisture condensation occurs, turn off the product and wait about an hour for the moisture to evaporate. Note that if you
attempt to shoot with moisture remaining inside the lens, you will be unable to record clear images.
On image data compatibility
This product conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics
and Information Technology Industries Association).
Notes on playing movies on other devices
XAVC S movies can be played back only on XAVC S-supported devices.
On the monitor and viewfinder
If you use the camera in a cold location, the image may have a trailing appearance. This is not a malfunction.
Do not press against the monitor. The monitor may be discolored and that may cause a malfunction.
If the monitor has drops of water or other liquids on it, wipe it with a soft cloth. If the monitor stays wet, the surface of the
monitor may change or deteriorate. This may cause a malfunction.
If the subject is too close, the image may show any dust or fingerprints on the lens. Wipe the lens with a soft cloth, etc.
The camera uses magnetic parts including magnets. Do not bring objects affected by magnetism, including credit cards and
floppy disks, close to the camera.
4-728-781-11(1) Copyright 2017 Sony Corporation
400