Sony ILCA-99M2, Руководство по обслуживанию

Страница: 11 / 15

3-10
ILCA-99M2
451
463
463
463
464
452
454
455
453
(Note 1, 2)
456
456
456
457
459
460
460 458
460
464
464
461
465
465
462
IS-1205 board
not supplied
not supplied
front side
rear side
Ref. No. Part No. Description Ref. No. Part No. Description
451 4-558-386-02 IM PLATE (5000), GLASS RETAINER
452 4-575-430-01 IM MASK PLATE (5100)
453 A-2170-956-A IM IMAGER UNIT ASSY 890 SERVICE
(Including IS-1025 board) (Note 1, 2)
454 1-856-702-21 OPTICAL FILTER BLOCK (OFB-01-122)
455 4-576-761-01 SHEET (5100), SPACER
456 4-593-436-02 IM RADIATION SHEET (890)
457 1-981-028-11 ISP-2005 FLEXIBLE BOARD
458 1-981-029-11 ISL-2006 FLEXIBLE BOARD
459 A-2170-955-A AS SLIDER UNIT ASSY 890 SERVICE
(Including ASC-2003 flexible board)
460 4-596-194-02 SPRING, AO ADJUSTMENT
461 4-592-247-01 IM HEATSINK (890)
462 4-592-245-02 IM G SHEET IS
463 2-635-562-31 SCREW (M1.7)
464 2-689-328-01 SCREW, CCD BLAST ADJUSTMENT
465 4-178-124-01 SPECIAL (M1.4 (D2.75))
3-10. ANTI SHAKE UNIT SECTION
Note 2:
• If the imager (Ref. No. 453) has been replaced, carry out all
the adjustments for the camera section.
• The imager (Ref. No. 453) may get structurally damaged
from the influence of static electricity. Protect against static
electricity and similarly take care when handling the MOS IC.
Also, keep the receiver of the imager away from debris and
intense light.
Note 1:
Refer to “5. CLEANING” on page 5-1 for method of
cleaning the OLPF.
SYS SET
2021/11/23 11:03:22 (GMT+09:00)