ICF-M770L/M770S/M770SL
9
9
Note on Printed Wiring Board:
•
X
: parts extracted from the component side.
•
Y
: parts extracted from the conductor side.
•
W
: indicates side identified with part number.
•
f
: internal component.
•
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
5-2.
NOTE FOR PRINTED WIRING BOARD AND SCHEMATIC DIAGRAMS
Note on Schematic Diagram:
• All capacitors are in
µ
F unless otherwise noted. pF:
µµ
F
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise
specified.
•
f
: internal component.
•
C
: panel designation.
• IC Block Diagram
IC1
CXA1019S
1
2
3
4
5
6
7
8
9
10
15
14
13
12
11
FM
DISCRIMINATOR
AF POWER AMP
AM FE
FM IF
TUNING
METER
AM IF DET AGC
FM FE
23
22
21
20
24
25
19
18 17 16
29 28 27 26
30
GND
GND
AF OUT
VCC
RIPPLE
FIL
TER
AF IN
DET OUT
AFC AGC
AFC AGC
IF GND
METER
N.C
FM IF IN
AM IF IN
FM/AM BAND
SELECT
FM/AM
IF OUT
FE GND
N.C
AM RF IN
FM RF
REG OUT
FM OSC
FM RF IN
AFC
AM OSC
VOL
NF
FM DISCRI
GND
GND
•
A
: B+ Line.
•
H
: adjustment for repair.
• Power voltage is dc 6 V and fed with regulated dc power
supply from battery terminal.
• Voltages and waveforms are dc with respect to ground in
no-signal (detuned) conditions.
no mark : FM
(
) : SW
[
] : MW
〈〈
〉〉
: LW
• Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal produc-
tion tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal produc-
tion tolerances.
• Circled numbers refer to waveforms.
• Signal path.
F
: FM
f
: MW/LW
Note: The components identified by mark
0
or dotted line
with mark
0
are critical for safety.
Replace only with part number specified.
• Circuit Boards Location
jack board
main board
key board
inlet board
power board
Содержание ICF-M770L
Страница 23: ...23 ICF M770L M770S M770SL MEMO ...
