ModelName: ICD-UX522/UX522F/UX523/UX523F
PartNumber: 4-293-033-12
1
1
Troubleshooting
Message
Cause/Remedy
Format Error
The IC recorder cannot be turned on using the computer
because there is no copy of the control file required for
operation. Format the IC recorder using the formatting
function in the menu (
p. 92). Do not use your computer
to format the IC recorder.
Process Error
The IC recorder failed in memory access. Remove and then
re-insert the battery.
Save a backup copy of your data and format the IC recorder
using the menu (
Stop and Reinsert
Memory Card
A memory card was inserted during recording or playback.
Remove the memory card and insert it while the IC
recorder is in the stop mode.
Set Date&Time
Set the clock; otherwise, you cannot set the alarm.
No File
The selected folder does not have any files. You cannot
move a file or set the alarm, etc., because of this.
No Track Marks
There are no track marks when you attempt to erase a track
mark or track marks, or divide a file at all the track mark
positions.
No Memory Card
There is no memory card inserted into the memory card
slot when you attempt to set the “Select Memory,” or “File
Copy” menus.
File Protected
The selected file is protected or is a “Read only” file. You
cannot erase it. Cancel the protection on the IC recorder or
cancel “Read only” on your computer to edit the file using
the IC recorder.
Already Set
You set the alarm to play back a file at a date and time
previously set on another file. Change the alarm setting.
Past Date/Time
You set the alarm when the time has already passed. Check
it and set the appropriate date and time (
Unknown Data
This data is not in a file format that is supported by the IC
recorder. The IC recorder supports LPCM(.wav)/MP3
(.mp3)/WMA(.wma)/AAC-LC(.m4a) files. For details, see
You cannot play back copyright protected files.
Continued