IC Recorder
ICD-SX733/SX734/SX1000
Dividing a file at the current position
You can divide a file in the stop mode, so that the file is divided into two parts and
new file numbers are added to the divided file names. By dividing a file, you can
easily find the point from which you want to play back when you make a long
recording such as at a meeting. You can divide a file until the total number of files
in the folder reaches the maximum number allowed.
1. Stop the file at the position where you want to divide a file.
2. Select MENU - the tab - “Divide Current Position,” and then press
.
A period of approximately 4 seconds from the dividing point will be played back
repeatedly.
3. Press
or
to adjust the position to be divided, if you wish.
You can adjust the position to be divided by approximately 0.3 seconds in a
period of approximately 6 seconds each, both before and after the current
position.
4. Press
.
“Divide?” appears on the display.
5. Press
or
to select “Execute,” and then press
.
The “Dividing...” animation appears, and the divided files will be suffixed with a
sequential number (“_1” for the original file, and “_2” for the new file).
A. Before dividing a file:
is the position you want to divide.
B. After dividing a file: A suffix made up of a sequential number is added to a
file name of the divided files.
6. Press
STOP to exit the menu mode.
Note
You cannot divide a protected file. To divide the file, release the protection first.
188
Search
Содержание ICD-SX1000
Страница 91: ...18 Battery indicator Go to Page Top 4 447 269 14 1 2013 Sony Corporation Notes on use 83 ...
Страница 121: ...and controls used for operations are the same Go to Page Top 4 447 269 14 1 2013 Sony Corporation Notes on use 113 ...
Страница 173: ...Go to Page Top 4 447 269 14 1 2013 Sony Corporation Notes on use 165 ...
Страница 193: ...Protecting a file Go to Page Top 4 447 269 14 1 2013 Sony Corporation Notes on use 185 ...
