Sony ICD-S7 Скачать руководство пользователя страница 58

Страница: 58 / 68

Troubleshooting

Before taking the unit for repair, check the following sections. Should any
problem persist after you have made these checks, consult your nearest
Sony dealer.

IC Recorder

Symptom

The unit does not
operate.

No sound comes
from the speaker.

Sound comes from
the speaker even
when the earphone or
headphones are
plugged in.

The OPR indicator
does not light.
“FULL” is displayed
and you cannot start
recording.

Remedy

•The batteries have been inserted with incorrect

polarity (page 6).

•The batteries are weak.
•The buttons are locked with the HOLD switch

(page 49). (If you press any button, “HOLD”
will flash for 3 seconds.)

•The earphone or headphones are plugged in.
•The volume is turned down completely.

•If you plug in the earphone or headphones not

securely during playback, the sound may come
from the speaker. Unplug the earphone or
headphones and then insert it securely.

•With some types of headphones, sound may

come from both the speaker and headphones.
Please use the headphones recommended for
the IC recorder.

•LED is set to OFF. Display the menu and set

the LED to ON.

•The memory is full. Erase some of the

messages (page 34).

•99 messages have been recorded in the selected

file. Select another file or erase some of the
messages (page 34).

Содержание ICD-S7





































































Результаты поиска

Содержание ICD-S7

Отзывы:

Похожие инструкции для ICD-S7

Бренды по названию

Популярные бренды

Sony ICD-S7, Руководство по эксплуатации

Результаты поиска

Содержание ICD-S7

Отзывы:

Похожие инструкции для ICD-S7

Бренды по названию

Популярные бренды