background image

5

GB

Features

Maximum recording time ICD-B10: 63 min. (SP)/168 min. (LP)

ICD-B15: 127 min. (SP)/339 min. (LP)

This unit is suitable for recording long meetings or lectures.

Possible of recording up to 99 messages in each of 3 folders (ICD-
B10)/5 folders (ICD-B15)

Alarm function (page 30)

You can start playing back a desired message with an alarm on a desired
date and time.

Timer recording function (page 27)

You can start recording automatically on a desired date and time.

Index function (page 23)

You can add an index at the desired point during recording or playback
to divide a message into two.
You can also combine messages by erasing the index.

Repeat play function (page 16, 18)

This unit can play back one message or the selected section repeatedly.

Easy search function (page 17)

You can quickly search for the point (10 seconds ahead or 3 seconds
back) and start playback.

Playback speed control (page 16)

You can play back messages rapidly or slowly . This is useful when
playing back a long recording such as a meeting.

Advanced VOR function (page 13)

Overwrite and additional recording functions (page 21)

You can overwrite after the desired point on a recorded message or add a
new recording to a previously recorded message.

External microphone jack (page 13)

Before You Begin

Содержание ICD-B10 - Ic Recorder

















































Отзывы: