Sony HXR-NX5R Скачать руководство пользователя страница 123

Страница: 123 / 148

123

rou
bl

oot
in

This memory card may not be able to
record or play images correctly.

• Use a memory card recommended for

your camcorder (p. 29).

• Contact your Sony dealer.

Do not eject the memory card during
writing. Data may be damaged.

• Reinsert the memory card, and follow

the instructions on the LCD screen.

Other

Maximum number of images already
selected.

• You can select only 100 images at one

time for:
– Deleting movies/photos
– Protecting movies/photos, or

releasing the protection

The following error messages may appear if
trouble occurs during FTP transfer or
streaming distribution. Try the solution
suggested on the display.

No registered access point.

There are no access points registered.
Select

(NETWORK

SET)

[Wi-Fi

SET]

[ACCESS POINT SET], and

Cannot find connectable access
point.
Set the access point setting.

An access point could not be found. Select

(NETWORK SET)

[Wi-Fi SET]

[ACCESS POINT SET], and check

the access point settings.

Connection to the access point
failed.
Please input your password again.

Could not connect to the access point. Try
re-entering the password for the access
point.

Connection with an access point
disconnected.
Check the connection condition.

Connection to the access point was
disconnected. Check the access point
connection conditions.

No response from the access point.

There was no response from the access
point. Check the connection with the
access point.

Failed to acquire an IP address.
Change the IP address setting.

Could not acquire the IP address.
If connecting to a network via a wireless
LAN, select

(NETWORK SET)

[Wi-Fi SET]

[ACCESS POINT SET],

and specify the IP address manually.
If connecting to a network via a wired
LAN, select

(NETWORK SET)

[WIRED LAN SET], and specify the IP
address manually.

Network error occurred.

A Wi-Fi communication error occurred.

Check the USB device connection.

Check the USB device connection.

Check the LAN cable connection.

Could not connect to the network. Check
the LAN cable connection.

Failed to connect to an FTP server.
Check the FTP server settings.

Check the registered FTP server settings.

Error messages

Continued

Содержание HXR-NX5R





















































































































































Результаты поиска

Содержание HXR-NX5R

Отзывы:

Бренды по названию

Популярные бренды

Sony HXR-NX5R, Руководство по эксплуатации

Результаты поиска

Содержание HXR-NX5R

Отзывы:

Бренды по названию

Популярные бренды