80
– Anywhere extremely hot, cold or humid.
Never leave them exposed to temperatures
above 60 °C (140 °F), such as under direct
sunlight, near heaters or in a car parked in the
sun. They may malfunction or become
deformed.
– Near strong magnetic fields or mechanical
vibration. The camcorder may malfunction.
– Near strong radio waves or radiation. The
camcorder may not be able to record properly.
– Near AM receivers and video equipment.
Noise may occur.
– On a sandy beach or anywhere dusty. If sand
or dust gets in your camcorder, it may
malfunction. Sometimes this malfunction
cannot be repaired.
– Near windows or outdoors, where the LCD
screen or the lens may be exposed to direct
sunlight. This damages inside the LCD
screen.
• Operate your camcorder on DC 6.8 V/7.2 V
(battery pack) or DC 8.4 V (AC Adaptor).
• For DC or AC operation, use the accessories
recommended in these operating instructions.
• Do not let your camcorder get wet, for example,
from rain or sea water. If your camcorder gets
wet, it may malfunction. Sometimes this
malfunction cannot be repaired.
• If any solid object or liquid gets inside the
casing, unplug your camcorder and have it
checked by a Sony dealer before operating it
any further.
• Avoid rough handling, disassembling,
modifying, physical shock, or impact such as
hammering, dropping or stepping on the
product. Be particularly careful of the lens.
• Keep your camcorder turned off when you are
not using your camcorder.
• Do not wrap your camcorder with a towel, for
example, and operate it. Doing so might cause
heat to build up inside.
• When disconnecting the power cord (mains
lead), pull it by the plug and not the cord (lead).
• Do not damage the power cord (mains lead)
such as by placing anything heavy on it.
• Do not use a deformed or damaged battery pack.
• Keep metal contacts clean.
• If the battery electrolytic liquid has leaked:
– consult your local authorized Sony service
facility.
– wash off any liquid that may have contacted
your skin.
– if any liquid gets in your eyes, wash with
plenty of water and consult a doctor.
x
When not using your camcorder for a
long time
• Periodically turn it on and let it run such as by
playing back or recording images for about 3
minutes.
• Use up the battery pack completely before
storing it.
Notes on splash-proof performance
Only this camera conforms to IEC60529
IPX2. Never use the camcorder in the
water. The camcorder main body is not
designed for splash-proof performance, and
do not wet the camcorder main body.
x
Care of this unit
• If this unit is splashed by water or other liquid,
wipe it completely with a dry soft cloth.
Although the camera is splash-proof, leaving the
unit wet may cause it to malfunction.
Clean the unit body with a cloth lightly
moistened with water, and then wipe the
moisture with a dry soft cloth. Do not wash the
unit in running water. Water may seep inside of
the unit due to the water pressure, and it may
damage the unit.
x
Usage life of the rubber casings
• Rubber casings are used on the camera of this
unit for splash-proof protection. The usage life
of these rubber casings vary depending on
usage. We recommend replacing these rubber
casings once a year to maintain the splash-proof
protection.
Moisture condensation
If your camcorder is brought directly from a
cold place to a warm place, moisture may
condense inside your camcorder. This may
cause a malfunction to your camcorder.
x
If moisture condensation has occurred
Leave your camcorder for about 1 hour
without turning it on.
Содержание HXR-MC1 Brochure
Страница 95: ......
