HXCU-FB80 (GB) 4-734-403-
12
(1)
Using the CD-ROM manual
The manual can be read on a computer with Adobe Reader installed.
You can download Adobe Reader free from the Adobe website.
1
Open the index.html file in the CD-ROM.
2
Select and click on the manual that you want to read.
Note
If you have lost or damaged the CD-ROM, you can purchase a new one from your
Sony dealer or Sony service counter.
Specifications
General
Power requirements
100 to 240 V AC, 50/60 Hz
Current consumption
2.2 A (max)
Operating temperature 5 ˚C to 40 ˚C (41 ˚F to 104 ˚F)
Storage temperature
−20 ˚C to +60 ˚C (−4 ˚F to +140 ˚F)
Mass
Approx. 6.2 kg (13 lb 11 oz)
Input/output connectors
CAMERA
Optical composite connector (1)
INTERCOM
XLR 5-pin (1)
INTERCOM/TALLY/PGM D-sub 25-pin, female (1)
INTERCOM (PROD, ENG), 4W/RTS/CC, 0 dBu
PGM 1 system, −20 dBu/0 dBu/+4 dBu
TALLY (R, G)
PREVIEW
REMOTE
8-pin multiconnector (1)
TRUNK
D-sub 9-pin, female (1), RS-232C/RS-422A
1 system
LAN
8-pin (1)
REFERENCE IN/OUT
BNC type (2), loop-through output
HD: SMPTE 274M, tri-level sync,
0.6 Vp-p, 75
Ω
SD: Black burst (NTSC: 0.286 Vp-p, 75
Ω
PAL: 0.3 Vp-p, 75
Ω
)
PROMPTER IN/OUT
BNC type (2), loop-through output, VBS signal, 1.0 Vp-
p, 75
Ω
, 1 system
Input connectors
AC IN
(1), 100 to 240 V AC
RETURN INPUT
BNC type (2), 1.0 Vp-p, 75
Ω
, 2 systems
VBS1, VBS2
RETURN INPUT
BNC type (2)
SDI1, SDI2
HD SDI: SMPTE ST292-1, 1.485 Gbps/1.4835 Gbps
SD SDI: SMPTE 259M, 270 Mbps
HD PROMPTER
BNC type (2)
HD SDI: SMPTE ST292-1, 1.485 Gbps/1.4835 Gbps
Output connectors
SLOT1
BNC type (4)
SDI OUTPUT (HD/SD) HD SDI: SMTPE ST292-1, 0.8 Vp-p, 75
Ω
1 to 4
SD SDI: SMPTE 259M, 0.8 Vp-p, 75
Ω
HD SDI/SD SDI selectable
SLOT2
BNC type (4)
SDI OUTPUT
4K/3G SDI 1 to 4: SMPTE ST425-5, Level-A/B, 0.8 Vp-p,
(4K/3G/HD TRUNK)
75
Ω
, 2160/59.94p, 2160/50p, 1080/59.94p, 1080/50p
OUTPUT 1 to 4
4K/12G SDI 1, 2: SMPTE ST2082-1, 0.8 Vp-p, 75
Ω
,
2160/59.94p, 2160/50p
HD 3G SDI: SMPTE ST425-1, 0.8 Vp-p, 75
Ω
,
1080/59.94p, 1080/50p
HD SDI 3, 4: SMPTE ST292-1
HD TRUNK: 1080/59.94i, 1080/50i, 0.8 Vp-p, 75
Ω
4K/3G/HD TRUNK selectable
VBS1, 2
BNC type (2), VBS 1.0 Vp-p, 75
Ω
PIX
BNC type (1), VBS/R/G/B (VBS 1.0 Vp-p, 75
Ω
)
SYNC
BNC type (1)
HD: BTA-S001A, tri-level sync, 0.6 Vp-p, 75
Ω
SD: Composite sync, 0.3 Vp-p, 75
Ω
HD SYNC/SD SYNC selectable
AUDIO OUTPUT
XLR 3-pin, male (2), 0 dBu/−20 dBu
CH-1, CH-2
Supplied accessories
Number plates (1 set)
Operating Instructions (CD-ROM)
Before Using This Unit (1 set)
Warranty booklet (1)
Optional accessories
United States and Canada: Plug holder B (2-990-242-01)
Other areas: Plug holder C (3-613-640-01)
United States and Canada: Power cord set (1-551-812-XX)
Other areas: Power cord set (1-782-929-XX)
CCA-5-3 (3 m), CCA-5-10 (10 m) connection cables
CCFN-25/50/100/150/200/250 Hybrid Fiber Cable
CCFN-JC1 Joint Adaptor
Service manual
Connectors for optical/electric composite cables:
HXCU-FB80N
Neutrik® opticalCON DUO
ˎ
ˎ
(to the “CAMERA” connector on CCU or POWER SUPPLY UNIT)
Neutrik® opticalCON DUO
ˎ
ˎ
(to the “CCU” connector on CAMERA or CAMERA ADAPTOR)
HXCU-FB80L
LEMO® PUW.3K.93C.TLCC96
ˎ
ˎ
(to the “CAMERA” connector on CCU or POWER SUPPLY UNIT)
LEMO® FUW.3K.93C.TLMC96
ˎ
ˎ
(to the “CCU” connector on CAMERA or CAMERA ADAPTOR)
Caution on the optical/electric composite cable:
For connection between the camera control unit and camera or camera adaptor,
between a power supply unit and camera or camera adaptor, be sure to use
an optical/electric signal composite cable with the connectors specified in this
manual in order to comply with the limit for EMC regulations.
Related equipment
HXC-FB80 HD Color Camera
HXC-FB75/E75 HD Color Camera
HXC-P70 HD Color Camera
CA-FB70 HD Camera Adaptor
HXCE-FB70 Power Supply Unit
RCP-3000/1000 series Remote Control Panel
Dimensions
366 (14 1/2)
Unit: mm
(inches)
424 (16 3/4)
482 (19)
66 (2 5/8)
Design and specifications are subject to change without notice.
Notes
Always verify that the unit is operating properly before use. SONY WILL
ˎ
ˎ
NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF
PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY,
OR FOR ANY OTHER REASON WHATSOEVER.
SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF
ˎ
ˎ
THIS UNIT OR MADE BY THIRD PARTIES.
SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION
ˎ
ˎ
OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.