82
Menu Contents
Chapt
er
7
Men
u
s
SETUP ADD [> Setup add]:
Determine whether or not to add
black setup to analog video output signals.
*
OFF [>> OFF]:
Do not add black setup.
ON (ADD) [>> ON]:
Add black setup.
Note
Displayed only when the system frequency is set to 60i.
CC(F1) BLANK [> CC1 blank]:
Select whether to suppress
the closed caption signal to be superimposed on the 1st
field of the output video signal.
*
OFF [>> OFF]:
Do not suppress.
ON [>> ON]:
Suppress.
Note
Displayed only when the system frequency is set to 60i.
CC(F2) BLANK [> CC2 blank]:
Select whether to suppress
the closed caption signal to be superimposed on the 2nd
field of the output video signal.
*
OFF [>> OFF]:
Do not suppress.
ON [>> ON]:
Suppress.
Note
Displayed only when the system frequency is set to 60i.
WIDE MODE [> Wide mode]:
Specify whether to add wide-
screen aspect ratio information to signals recorded or
played back.
*
AUTO [>> Auto]:
Automatically add wide-screen aspect ratio
information when it is detected from the input video signal
currently selected or the tape currently being played back.
OFF [>> OFF]:
Ignore wide-screen aspect ratio information.
ON [>> ON]:
Always add wide-screen aspect ratio information.
ESR MODE [> ESR mode]:
Select whether to enable the
edge subcarrier reducer (ESR).
*
OFF [>> OFF]:
Do not enable.
ON [>> ON]:
Enable.
When playing back a composite signal, set this to ON.
SD PROCESS CONTROL
[> SD Process]
C PHASE MODE [>> C Phas
MD]:
Select the phase
rotation mode for chroma
phase control.
The effect of this setting
applies to the output
levels of all of the
composite video, S-video,
SDI and component
video signals.
*
U/V (COMPOSITE) [>>> Cmpst]:
Select this setting when
observing the composite video output level using a
composite signal vectorscope.
PB/PR (COMPONENT) [>>> Cmpnt]:
Select this setting when
observing the component video output level using a
component signal vectorscope.
ADJ RANGE [>> Adj range]:
Select the adjustment
range of the VIDEO and
CHROMA gains.
*
–3 to +3 (dB) [>>> –3/+3]:
–3 dB to +3 dB
WIDE [>>> wide]:
–
∞
to +3 dB
VIDEO GAIN [>> V gain]:
Set the video output
level.
000 [>>> 000] to 3FF [>>> 3FF]
Factory default setting:
*
200H
CHROMA GAIN [>> C gain]:
Set the chroma output
level.
000 [>>> 000] to 3FF [>>> 3FF]
Factory default setting:
*
200H
CHROMA PHASE [>> C
phase]:
Set the chroma
phase.
00 [>>> 00] to FF [>>> FF]
Factory default setting:
*
80H
SETUP LEVEL [>> Setup
lev]:
Set the black setup
level.
000 [>>> 000] to 3FF [>>> 3FF]
Factory default setting:
*
200H
VIDEO CONTROL [Video]: Settings related to video
control
Description of settings
