Sony HVO-3300MT, Инструкция по эксплуатации

Страница: 78 / 99

78
[IP Address]
Enter the IP address.
[Subnet Mask]
Enter the subnet mask.
[Default Gateway]
Enter the IP address for the default gateway.
If you are only using a local network and not connecting
to other networks, do not configure this setting.
[DNS Server] Tab
[Auto DNS server address]
Select [Use] to obtain the IP address for the DNS server
automatically, or select [Not Used] to specify the IP
address manually.
If you selected [Not Used], be sure to configure the
[Preferred DNS server] and [Alternate DNS server]
settings.
[Preferred DNS server]
Enter the IP address for the preferred DNS server.
If you do not have nor need a preferred DNS server, do
not configure this setting.
[Alternate DNS server]
Enter the IP address for the alternate DNS server.
If you do not have nor need an alternate DNS server, do
not configure this setting.
[File Server] Tab
Configure these settings when specifying a server as the
storage destination for recorded data.
[Server]
Select [Common Setting (Share)] to specify a server as
the storage destination.
The default setting is [Not Used].
If you selected [Common Setting (Share)], be sure to
configure the share name and other settings in the
[Shared] tab.
For details on this setting, see “[Shared] Tab” (page 80).
[Server Name]
Enter the server name.
[Share Name]
Enter the share name.
Use only alphanumeric characters and symbols
(excluding " = / \ [ ] :
|
< > + ; , ? *).
[Shared] Tab
Configure the necessary settings for using a server as the
storage destination.
[User Name]
Enter a user name.
[Password]
Enter the password.
[NTP] Tab
Configure these settings to obtain the current time from
the NTP server.
[NTP]
Select [Use] to obtain the current time from the NTP
server.
The default setting is [Not Used].
If you selected [Use], be sure to configure the [Address]
and [Port No.] settings.
[Address]
Enter the address for the NTP server.
[Port No.]
Enter the port number.
The default setting is [123].
[Streaming] Tab
Configure these settings when using the streaming
function.
[Streaming]
Select whether to use the streaming function.
The default setting is [Not Used].
[Advanced] appears when [Use] is selected. For details
on the settings, see “To configure the image size and
quality” (page 79).
[Port No.]
Enter the port number.
This item is available when [Streaming] is set to [Use].
You can enter 554 or a value ranging from 1024 to 65535
(up to 5 digits).
The default setting is [554].
[Audio Delivery]
Select whether to transmit audio.
This item is available when [Streaming] is set to [Use].
The default setting is [Use].